671347
22
Zoom out
Zoom in
Previous page
1/32
Next page
Si observa uno o más defectos, no repare el tubo:
cámbielo.
ADVERTENCIA! Cuando la
instalación esté terminada, asegúrese
de que el sello de cada racor del tubo
es correcto. Utilice una solución
jabonosa, nunca una llama.
SUSTITUCIÓN DE LOS INYECTORES
1. Retire los soportes para sartenes.
2. Retire las tapas y las coronas del quemador.
3. Con una llave tubular del 7, desatornille y retire
los inyectores y sustitúyalos por los adecuados
al tipo de gas que va a utilizar (consulte la tabla
del capítulo “Datos técnicos”).
4. Vuelva a montar las piezas siguiendo el
procedimiento anterior en orden inverso.
5. Sustituya la placa de características (situada
cerca del tubo de suministro de gas) por la
correspondiente al nuevo tipo de suministro de
gas. Encontrará esta placa en el embalaje del
aparato.
Si la presión del suministro de gas se puede
cambiar o es diferente de la necesaria, debe
instalar un regulador de presión adecuado en el
tubo del suministro de gas.
AJUSTE DEL NIVEL MÍNIMO
Para ajustar el nivel mínimo de los quemadores:
1. Encienda el quemador.
2. Gire el mando hasta la posición mínima.
3. Retire el mando y la junta.
ADVERTENCIA! Tenga cuidado de
no dañar la junta. No utilice
herramientas afiladas para quitar el
hielo.
4. Con un destornillador plano, ajuste la posición
del tornillo de derivación (A).
A
5. Si cambia:
de gas natural G20 de 20 mbar a gas
líquido, apriete totalmente el tornillo de
derivación.
de gas líquido a gas natural G20 de 20
mbar, desatornille el tornillo de derivación
aproximadamente 1/4 de vuelta (1/2 vuelta
para el quemador de multi corona).
6. Vuelva a montar la junta y el mando.
ADVERTENCIA! Asegúrese de
colocar la junta exactamente en la
posición original.
ADVERTENCIA! Asegúrese de que
la llama no se apaga cuando gire
rápidamente el mando de la posición
máxima a la posición mínima.
CONEXIÓN ELÉCTRICA
Asegúrese de que el voltaje nominal y el tipo de
suministro que indica la placa de datos técnicos
coinciden con los del lugar donde se va a
instalar el aparato.
Este aparato se suministra con un cable de
alimentación. Debe estar equipado con un
enchufe adecuado capaz de soportar la carga
indicada en la placa de características.
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZGH62424XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZGH62424XA in the language / languages: Portuguese, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZGH62424XA

Zanussi ZGH62424XA User Manual - German, Dutch, French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info