Manual Zanussi zgg 643 ica n w y (page 41 of 48) (English, German, Dutch, French)

333092

Zoom out

Zoom in

1/48

These hobs can be inserted in a built-in kitchen unit

whose depth is between 550 and 600 mm. The hobs

dimensions are shown in Fig. 9.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 150 mm.

Hanging forniture units or hoods must be placed at 650

mm. minimum from the hob.

Fitting the hob to the worktop

Before fitting the hob into the cut out, an adhesive seal

must be fitted to the underside outside edge (Fig. 9) of

the hob. It is essential that no gaps are left in this seal

in order to prevent spillage near the hob seeping into

the cabinet below.

1) Remove the pan supports, the burners caps and

crowns and turn the hob upside down, taking care the

ignition candles are not damaged in this operation.

2) Place the sealing gasket all around the glass top

edge as shown in Fig. 9.

3) Place the hob in the cut out, taking care that it is

centred. Fix the hob with the relevant fixing clamps,

supplied with the injectors kit (Fig.10). When the screws

have been tightened, the excess seal can be removed.

Fig. 8

A = Auxiliary burner

SR = Semirapid burner

R = Rapid Burner

Dimensions are given in

millimeters

Building In

sealing

gasket

Fig. 9

Fig. 10

FO 2320

FO 2321

FO 2340

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zgg 643 ica n w y in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi zgg 643 ica n w y Manual

Product: