Manual Zanussi ZFX51400 (page 21 of 56) (English, German, Dutch, French)

551945

Zoom out

Zoom in

1/56

1. Remove the plug

from the power sock-

et.

2. Remove the top

hinge cover.

3. Unscrew the 2 re-

taining screws, and

remove the hinge from

the appliance.

4. Take the door off.

5. Remove the screw

fixing the lower door

hinge and the other

screw fixing the lower

door hinge and the

foot. Then remove the

door hinge and the

foot as shown in the

Figure.

6. Loosen the screw

fixing the foot oppo-

site the lower door

hinge in order to re-

move the foot.

7. Fix the door hinge

and the correspond-

ing foot on the oppo-

site side and then the

other loosened foot at

the former place of

the door hinge as

shown in the Figure.

8. Please make

sure to place the

lower foot below

the door hinge. The

lower foot is recog-

nizable by its 4 ribs

on the outer sur-

face.

9. Fix the door onto

the lower hinge pin.

10. To fit top door

hinge, remove the

plastic blanking plugs

carefully, and refit

them in the holes left

by the hinge retaining

screws.

11. Refit the top

hinge using the 2 re-

taining screws, taking

care that the edge of

the door is parallel

with side of the cabi-

net.

12. Replace the hinge

cover.

13. Relocate the han-

dle and the plastic

plugs to the opposite

side.

14. Level the appli-

ance, wait for at least

four hours and then

connect it to the pow-

er socket.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Win-

ter), the gasket may not fit perfectly to the cab-

inet. In that case, wait for the natural fitting of

the gasket.

In case you do not want to carry out the above

mentioned operations, contact the nearest Af-

ter Sales Service Force. The After Sales Serv-

ice specialist will carry out the reversibility of

the doors at your cost.

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate cor-

respond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power supply

socket is not earthed, connect the appliance

to a separate earth in compliance with current

regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if

the above safety precautions are not observed.

This appliance complies with the E.E.C. Direc-

tives.

www.zanussi.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFX51400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZFX51400 Manual

Product: