636402
18
Zoom out
Zoom in
Previous page
1/48
Next page
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe
clean to ensure they are clean and free from
debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser and the
compressor at the back of the appliance
with a brush.
This operation will improve the performance
of the appliance and save electricity
consumption.
The lowest shelf, dividing the cooler
compartment from the compartment can be
removed only for cleaning. To remove pull out
the shelf straight.
To make sure fully functionality of the
compartment the lowest shelf and
cover plates must be put back in
their original position after cleaning.
The cover plates above the drawers in the
compartment can be taken out for cleaning.
Defrosting the freezer
A certain amount of frost will always form on the
freezer shelves and around the top
compartment. Defrost the freezer when the frost
layer reaches a thickness of about 3-5 mm.
Defrosting can be accelerated by placing bowls
with hot water (not boiling) inside the freezer.
CAUTION!
Never use sharp metal tools to
scrape off frost from the evaporator
as you could damage it. Do not use
a mechanical device or any artificial
means to speed up the thawing
process other than those
recommended by the manufacturer.
A temperature rise of the frozen food
packs, during defrosting, may
shorten their safe storage life.
About 12 hours prior to defrosting,
set the Temperature Regulator
toward higher settings , in order to
build up sufficient chill reserve for
the interruption in operation.
1. Switch off the appliance and disconnect the
mains plug from the mains socket.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place.
CAUTION!
Do not touch frozen goods with
wet hands. Hands can freeze to
the goods.
3. Leave the door open and insert the plastic
scraper in the appropriate seating at the
bottom centre, placing a basin underneath
to collect the defrost water.
In order to speed up the defrosting process,
place a pot of warm water in the freezer
compartment. In addition, remove pieces of
ice that break away before defrosting is
complete.
4. When defrosting is completed, dry the
interior thoroughly and keep the scraper for
future use.
5. Switch on the appliance.
6. Turn the Temperature Regulator to the Full
Loaded position and leave to run for at least
8 hours.
7. After the Red Indicator Light has gone out,
reload the previously removed food into the
compartments.
8. Adjust the Temperature Regulator
according to the quantity of the stored
foods.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Defrost (if necessary) and clean the
appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
18 www.zanussi.com
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZFT11114WA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFT11114WA in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info