Manual Zanussi ZFT 710 W (page 22 of 48) (English, German, Dutch, French)

447616

Zoom out

Zoom in

1/48

1. Remove the plug from

the power socket.

2. Tilt back the appliance

carefully so that the com-

pressor cannot touch the

floor.

3. Unscrew the adjustable

feet, situated on both sides

at the front.

4. Remove the lower door

hinge by unscrewing the 2

retaining screws.

5. Remove the hinge pin

from the bottom of the

door.

6. Slot the hinge pin into

the hole in the hinge plate.

7. Take the door off.

8. Refit the upper hinge pin

into the opposite location.

9. Fit the door in place on

the hinge pin.

10. Slot the hinge pin into

the hole in the hinge plate

and relocate the hinge as-

sembly to the opposite lo-

cation and refit using the

retaining screws.

11. Refit the bottom hinge

plate assembly on the op-

posite side, taking care that

the edge of the door is par-

allel with the side of the

cabinet.

12. Remove and install the

handle

on the opposite

side.

13. Reposition, level the

appliance, wait for at least

four hours and then con-

nect it to the power socket.

1) If foreseen

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gas-

ket may not fit perfectly to the cabinet. In that case, wait

for the natural fitting of the gasket.

In case you do not want to carry out the above mentioned

operations, contact the nearest After Sales Service Force.

The After Sales Service specialist will carry out the rever-

sibility of the doors at your cost.

Electrical connection

Before plugging in, ensure that the voltage and frequency

shown on the rating plate correspond to your domestic

power supply.

The appliance must be earthed. The power supply cable

plug is provided with a contact for this purpose. If the do-

mestic power supply socket is not earthed, connect the

appliance to a separate earth in compliance with current

regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above

safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

Environmental concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please contact

your local council, your household waste disposal service

or the shop where you purchased the product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFT 710 W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZFT 710 W Manual

Product: