Manual Zanussi ZFT 410W (page 4 of 48) (English, German, Dutch, French)

447618

Zoom out

Zoom in

1/48

• This product must be serviced by an authorized Service

Centre, and only genuine spare parts must be used.

Environment Protection

This appliance does not contain gasses which could

damage the ozone layer, in either its refrigerant cir-

cuit or insulation materials. The appliance shall not be

discarded together with the urban refuse and rubbish. The

insulation foam contains flammable gases: the appliance

shall be disposed according to the applicable regulations

to obtain from your local authorities. Avoid damaging the

cooling unit, especially at the rear near the heat exchang-

er. The materials used on this appliance marked by the

symbol

are recyclable.

Control panel

1 2 3 4 5

1 Green Indicator Light

2 Red Indicator Light

3 Yellow Indicator Light

4 Freezer Switch

5 Temperature Regulator

Switching on

1. Allow the appliance to stand for 4 hrs after installa-

tion.

2. Insert the plug into the wall socket.

3. Turn the Temperature Regulator clockwise to a medi-

um setting.

4. The Green Indicator Light will light up and remain lit

until the appliance is switched off at the mains.

5. Press the Freezer Switch to activate the fast-freeze

function (Yellow Indicator Light will illuminate) and

leave to run for 4 hours to allow the correct tempera-

ture to be reached before placing food inside.

Yellow Indicator Light lights in the switched-on state

of the Freezer Switch.

6. The Red Indicator Light will also illuminate until the

correct temperature is reached.

A few hours after starting up the Red Indicator Light

will go out to show that the correct temperature has

been reached for the setting chosen and will stay out

to indicate that everything is in order. It will come on

if the freezer temperature rises unduly for instance, af-

ter opening the freezer door or placing food inside the

cabinet, but the light should go out again when the

temperature returns to the correct storage level.

7. When the appliance has reached the set temperature

(the Red Indicator Light has gone out) press the

Freezer Switch again to switch off the fast freeze func-

tion. The Yellow Indicator Light will go out.

Switching off

1. To turn off the appliance, turn the Temperature Regu-

lator to the "O" position.

2. To disconnect the appliance from the power discon-

nect the mains plug from the wall socket.

Temperature regulation

The temperature within the appliance is controlled by the

Temperature Regulator situated on the control panel.

To operate the appliance, proceed as follows:

• turn the Temperature Regulator toward lower settings

to obtain the minimum coldness.

• turn the Temperature Regulator toward higher settings

to obtain the maximum coldness.

A medium setting is generally the most suitable.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFT 410W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZFT 410W Manual

Product: