Manual Zanussi ZFC 151 (page 5 of 26) (English, German, Dutch, French)

447585

Zoom out

Zoom in

1/26

Reinigung der Innenteile

Bevor Sie das GerŠt in Betrieb nehmen, beseitigen

Sie den typischen ÇNeugeruchÈ am besten durch

Auswaschen der Innenteile mit lauwarmem Wasser

und einem neutralen Reinigungsmittel SorgfŠltig

nachtrocknen.

Bitte keine Reinigungs- bzw. Scheuermittel

verwenden, die das GerŠt beschŠdigen

kšnnten.

Dieses Gefrierabteil ist mit dem

ÇViersterne-È Symbol versehen, was bedeutet,

da§ darin sowohl frische Lebensmittel

eingefroren werden kšnnen als auch

TiefkŸhlkost langfristig gelagert werden kann.

Inbetriebnahme

Netzstecker in die Steckdose einstecken. Das

Aufleuchten der Kontrollampe (D) zeigt an, da§ das

GerŠt unter Spannung steht.

Den Schalter (E) Ÿber die Stellung ÇOÈ drehen. Die

Kontrollampe (A) leuchtet auf.

Den Stillstand erhŠlt man durch Drehen des

Schalters (E) auf Stellung ÇOÈ.

Temperaturregelung

Die Temperatur wird automatisch geregelt und kann

erhšht werden (wŠrmer) durch Drehen des Thermo-

statknopfes auf kleinere ● oder verringert (kŠlter)

durch das Drehen auf gršssere ●.

Die richtige Einstellung erhŠlt man, unter

BerŸcksichtigung folgender, die Innentemperatur

beeinflussender Faktoren:

¥ Raumtemperatur,

¥ HŠufigkeit des TŸršffnens,

¥ Menge der eingelagerten Lebensmittel,

¥ Aufstellung des GerŠtes.

Wichtig

Hšchste KŠlteeinstellung bei hoher

Raumtemperatur und erheblicher

Lebensmittelmenge kann fortdauernden

KŸhlschrank-Betrieb verursachen, dabei kann

sich eine Reif- oder Eisschicht an der hinteren

Innenwand bilden. In diesem Falle den

Thermostatknopf auf wŠrmere Temperaturen

stellen, damit das automatische Abtauen, mit

folglich geringerem Stromverbrauch,

gewŠhrleistet werden kann.

GEBRAUCH

Bedienungsblende

ABCD E

A. Alarm-Lampe

B. Schnellgefrierkontrollampe

C. Schnellgefrierschalter

D. Betreibskontrollampe

E.Temperaturregler(Thermostat)

Schnellgefriervorgang

Schalterknopf (C) drucken. Die Kontrollampe (B)

leuchtet auf.

Alarmlampe (A)

Die Alarmlampe leuchtet auf, wenn die Temperatur

im GerŠteinneren steigt, und dadurch die richtige

Lagertemperatur nicht mehr gewŠhrleistet wird. Sie

leuchtet jedoch auch dann auf, wenn das GerŠt

gerade eingeschaltet worden ist und bleibt solange

eingeschaltet, bis die richtige Lagertemperatur

erreicht ist.

D162/a

PR18

Changing the opening direction of

the door

Before carrying out any operations, remove the plug

from the power socket.

To change the opening direction of the door,

proceed as follows:

1. Remove the ventilation grill (D).

2. Unscrew the bottom hinge (E).

3. Remove the door by releasing it from the top

hinge pin (G).

4. Remove the pin then mount these on the

opposite side.

5. Remove the two plugs, to reveal the holes for the

hinge pivots, and remount them on the other

side.

6. Replace the freezer door.

7. using a 10 mm spanner, unscrew the hinge pin

(E) and reassemble it on the opposite side of the

hinge;

8. Screw down the bottom hinge (E) on the opposite

side by using the screws previously removed.

9. Remove the plug (F) from the ventilation grill (D)

and replace it on the opposite side.

10.Re-assemble the ventilation grill (D).

11.Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs

contained in the documentation pack.

Warning:

After having reversed the opening direction of the

doors check that all the screws are properly

tightened and that the magnetic seal adheres to the

cabinet. If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the

gasket or accelerate this process by heating up the

part involved with a normal hairdrier.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZFC 151 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZFC 151 Manual

Product: