71059
31
Zoom out
Zoom in
Previous page
1/44
Next page
31
Before the first use
Once the hob has been installed, it is important to remove
any protective material, which were put on in the factory.
It is important to note that the plate may smoke a little
and produce a slightly unpleasant odour when used for
the first time. This is quite normal and will disappear after
a few minutes.
Practical hints
When cooking by electric, saucepans should have a thick
base and be perfectly flat in order to ensure total contact
with the plate and, consequently, perfect conduction (Fig.
1).
Occasionally, saucepans have a thin bottom and these
loose their shape over a period of time. In this manner
two of the qualities of the electric plate are lost: the even
distribution of heat and the saving of energy. Cooking time
is also lengthier. We therefore recommend that you
acquire a battery of kitchenware specifically for use with
electric plates. Furthermore, these particular saucepans
are easy to use and clean.
Recipients in heat-resistent glass (pyrex) or in oven-proof
pottery can be placed directly on the plates if their
instructions for use are followed.
As regards the size of the saucepans: for best results,
the plate and the saucepan should have the same
diameter. The diameter of the saucepan may be slightly
larger; a smaller diameter is not advised.
Never leave the plates on without a saucepan! Switch off
the plate just before the end of cooking time. The heat
accumulated by the plate will finish cooking the food and
save energy.
Before cleaning, disconnect the appliance
To ensure the long-life of the hob, we advise you to clean
it regularly. Naturally, before cleaning the plates, allow
them to cool.
Do not acquire the bad habit of wiping over the plates with
a damp cloth whilst they are still hot. Although they will
stand up to such teatment, fragments of the cloth could
remain. The plates and their bases can, however, be
cleaned occasionally using fine sandpaper.
The base of the plates in special steel will stay
impeccable if cleaned with hot water and vinigar. We
advise you to grease the surface of the plates from time
to time with a non-acid fat (cooking oil, sewing machine
oil or vaseline). Products for care and maintenance are
available commercially.
Hints and tips
Cleaning and maintenance
Clean the control panel with a damp cloth, do not use
abrasive products. The knobs can be removed by lifting
to facilitate cleaning.
The enamelled part of the hob can be cleaned with warm
water and detergent.
Although the enamel will tollerate acids, we advise you
to quickly remove splashes of vinigar, lemon and all acid
substances.
Also immediately remove all residue of fat or other to
avoid any incrustation. If incrustations have formed leave
the crust immersed in hot water. Never use metal
brushes, knives or similar objects which could scratch
the enamel. Avoid using acid detergents. Clean steel
hobs with specific detergents.
Fig. 1
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZEL63X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZEL63X in the language / languages: Dutch as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info