591099
14
Zoom out
Zoom in
Previous page
1/16
Next page
Problem and alarm code Possible solution
You cannot activate the appliance. Make sure that the mains plug is connected to the
mains socket.
Make sure that there is no damaged fuse in the fuse
box.
The programme does not start. Make sure that the appliance door is closed.
The appliance has started the procedure to re-
charge the resin inside the water softener. The dura-
tion of the procedure is approximately 5 minutes.
The appliance does not fill with water.
The end indicator flashes 1 time inter-
mittently.
Acoustic signal sounds 1 time intermit-
tently.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is
not too low. For this information, contact your local
water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clog-
ged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the water.
The end indicator flashes 2 times inter-
mittently.
Acoustic signal sounds 2 times inter-
mittently.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or
bends.
The anti-flood device is on.
The end indicator flashes 3 times inter-
mittently.
Acoustic signal sounds 3 times inter-
mittently.
Close the water tap and contact an Authorised
Service Centre.
Once you have checked the appliance, deactivate
and activate the appliance. If the problem occurs
again, contact an Authorised Service Centre.
For alarm codes not described in the table, contact
an Authorised Service Centre.
THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY
Problem Possible solution
There are whitish streaks or blu-
ish layers on glasses and dishes.
The release quantity of rinse aid is too much. Adjust the rinse
aid selector to a lower position.
The quantity of detergent is too much.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Adjust the
rinse aid selector to a higher position.
The quality of the rinse aid can be the cause.
The dishes are wet. The programme does not have a drying phase or has a drying
phase with low temperature.
The rinse aid dispenser is empty.
The quality of the rinse aid can be the cause.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZDT21001 FA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDT21001 FA in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZDT21001 FA

Zanussi ZDT21001 FA User Manual - German - 48 pages

Zanussi ZDT21001 FA User Manual - Dutch, Danish - 44 pages

Zanussi ZDT21001 FA User Manual - French, Norwegian - 48 pages

Zanussi ZDT21001 FA User Manual - Finnish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info