551673
25
Zoom out
Zoom in
Previous page
1/56
Next page
Problem Possible cause Possible solution
The appliance does not drain
the water.
The sink spigot is clogged. Clean the sink spigot.
The water drain hose has a kink or a
bend.
Make sure that the position of the hose is
correct.
After the checks are completed, activate the appliance. The
programme continues from the point of interruption.
If the problem occurs again, contact the Service.
If the display shows other alarm codes, contact the Serv-
ice.
The washing results and drying results are not satisfactory
Problem Possible cause Possible solution
The dishes are not clean. The filters are clogged. Clean the filters.
The filters are not correctly assembled
and installed.
Make sure that the filters are correctly as-
sembled and installed.
The spray arms are clogged. Remove remaining soil with a thin pointed
object.
The programme was not applicable for
the type of load and soil.
Make sure that the programme is applica-
ble for the type of load and soil.
Incorrect position of the items in the
baskets. Water could not wash all items.
Make sure that the position of the items in
the baskets is correct and that the water
can easily wash all items.
The spray arms could not turn freely. Make sure that the position of the items in
the baskets is correct and does not cause
the blockage of the spray arms.
The quantity of detergent was not suffi-
cient.
Make sure that you add the correct quan-
tity of detergent in the dispenser before
you start a programme.
There was no detergent in the detergent
dispenser.
Make sure that you add detergent in the
dispenser before you start a programme.
Limescale particles on the
dishes.
The salt container is empty. Make sure that there is dishwasher salt in
the salt container.
The set level of the water softener is in-
correct.
Make sure that the set level of the water
softener agrees with the water hardness in
your area.
The cap of the salt container is loose. Tighten the cap.
Whitish streaks and stains or
bluish layers on glasses and
dishes.
The released quantity of rinse aid is too
much.
Decrease the released quantity of rinse aid
.
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZDT16002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDT16002 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info