Manual Zanussi ZDT15003 (page 19 of 88) (English, German, Dutch, French, Italian, Spanish)

517360

Zoom out

Zoom in

1/88

Programme

Degree of soil

Type of load

Programme phases Duration

(min)

Energy

(kWh)

Water

(l)

Normal or light soil

Delicate crockery and

glassware

Wash 45 °C

Rinses

Dry

60-70 0,8-0,9 14-15

1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the

programme duration and the consumption values.

2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity

of the water, the energy consumption and the programme duration.

3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

4) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy

consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.

Options

Multitab function

Activate this function only when you use the combi deter-

gent tablets.

This function deactivates the flow of rinse aid and salt.

The salt indicator is off.

The programme duration can increase.

Activating the multitab function

Activate or deactivate the multitab function before

the start of a programme. You cannot activate or de-

activate this function while a programme operates.

1. Press the on/off button to activate the appliance.

2. Make sure that the appliance is in setting mode. Refer

to ‘SETTING AND STARTING A PROGRAMME'.

3. Press and hold function buttons (D) and (E) at the

same time until the multitab indicator comes on.

The function stays on until you deactivate it. Press

and hold function buttons (D) and (E) at the same

time until the multitab indicator goes off.

If you stop to use the combi detergent tablets, before you

start to use separately detergent, rinse aid and dishwasher

salt, do these steps:

1. Deactivate the multitab function.

2. Set the water softener to the highest level.

3. Make sure that the salt container and the rinse aid

dispenser are full.

4. Start the shortest programme with a rinsing phase,

without detergent and without dishes.

5. Adjust the water softener to the water hardness in

your area.

6. Adjust the released quantity of rinse aid.

Acoustic signals

The acoustic signals operate in these conditions:

• The programme is completed.

• The level of the water softener is adjusted electronical-

ly.

• The appliance has a malfunction.

Factory setting: on. You can deactivate the acoustic

signals.

Deactivating the acoustic signals

1. Press the on/off button to activate the appliance.

2. Make sure that the appliance is in setting mode. Refer

to ‘SETTING AND STARTING A PROGRAMME’.

3. Press and hold function buttons (B) and (C) at the

same time until the indicators of function buttons (A),

(B) and (C) flash.

4. Press function button (C),

• The indicators of function buttons (A) and (B) go

off.

• The indicator of function button (C) continues to

flash.

• The end indicator comes on.

5. Press function button (C). The end indicator goes off,

the acoustic signals are deactivated.

6. Deactivate the appliance to confirm.

Activating the acoustic signals

1. Refer to ‘Deactivating the acoustic signals’, step (1)

through (3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDT15003 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZDT15003 Manual

Product: