Manual Zanussi ZDT 16011 FA (page 19 of 72) (English, German, Dutch, French, Portuguese)

551672

Zoom out

Zoom in

1/72

4. Start the shortest programme with a rinsing

phase, without detergent and without

dishes.

5. Adjust the water softener to the water hard-

ness in your area.

6. Adjust the released quantity of rinse aid.

Acoustic signals

The acoustic signals operate in these condi-

tions:

• The programme is completed.

• The level of the water softener is adjusted

electronically.

• The appliance has a malfunction.

Factory setting: on. You can deactivate the

acoustic signals.

Deactivating the acoustic signals

1. Press the on/off button to activate the appli-

ance. Make sure that the appliance is in set-

ting mode. Refer to ‘SETTING AND

STARTING A PROGRAMME’.

2. Press and hold function buttons (B) and (C)

at the same time until the indicators of func-

tion buttons (A), (B) and (C) flash.

3. Press function button (C),

• The indicators of function buttons (A)

and (B) go off.

• The indicator of function button (C) con-

tinues to flash.

• The display shows the setting of the

acoustic signals.

Off

4. Press function button (C) to change the

setting.

5. Deactivate the appliance to confirm.

Before first use

1. Make sure that the set level of the water

softener agrees with the water hardness in

your area. If not, adjust the water softener.

Contact your local water authority to know

the water hardness in your area.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Processing residues can stay in the appli-

ance. Start a programme to remove them.

Do not use detergent and do not load the

baskets.

If you use the combi detergent tablets, ac-

tivate the multitab function. These tablets

contain detergent, rinse aid and other added

agents. Be sure that these tablets are applica-

ble to the water hardness in your area. Refer to

the instructions on the packaging of the prod-

ucts.

Adjusting the water softener

Hard water contains a high quantity of minerals

that can cause damage to the appliance and

bad washing results. The water softener neu-

tralises these minerals.

The dishwasher salt keeps the water softener

clean and in good conditions. Refer to the table

to adjust the water softener to the right level. It

makes sure that the water softener uses the

correct quantity of dishwasher salt and water.

You must adjust the water softener man-

ually and electronically.

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Manual Elec-

tronic

51 - 70 91 - 125 9.1 - 12.5 64 - 88

www.zanussi.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDT 16011 FA in the language / languages: English, German, Dutch, French, Portuguese as an attachment in your email.

The manual is 9,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZDT 16011 FA Manual

Product: