Manual Zanussi ZDT 13011 (page 24 of 56) (English, German, Dutch, French)

551674

Zoom out

Zoom in

1/56

To remove filters (B)

and (C), turn the han-

dle counterclockwise

and remove. Pull

apart filter (B) and

(C). Wash the filters

with water.

Remove filter (A).

Wash the filter with

water.

Put filter (A) to its ini-

tial position. Make

sure that it assembles

correctly under the

two guides (D).

Assemble filters (B)

and (C). Put them in-

to position in filter

(A). Turn the handle

clockwise until it

locks.

An incorrect position of the filters can

cause bad washing results and damage to

the appliance.

Cleaning the spray arms

Do not remove the spray arms.

If the holes in the spray arms are clogged, re-

move remaining parts of soil with a thin pointed

object.

External cleaning

Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use abra-

sive products, abrasive cleaning pads or sol-

vents.

Troubleshooting

The appliance does not start or it stops during

operation.

First try to find a solution to the problem (refer

to the table). If not, contact the Service.

With some problems, some indicators

flash continuously and/or intermittently

at the same time to show an alarm code.

Alarm code Problem

• The indicator of the set programme flashes contin-

uously.

• The end indicator flashes 1 time intermittently.

The appliance does not fill with water.

• The indicator of the set programme flashes contin-

uously.

• The end indicator flashes 2 times intermittently.

The appliance does not drain the water.

www.zanussi.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDT 13011 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZDT 13011 Manual

Product: