Manual Zanussi zdt 112 (page 20 of 68) (English, German, Dutch, French)

128028

Zoom out

Zoom in

1/68

Indicator lights

End Comes on when the washing programme is completed.

Auxiliary functions:

• Level of the water softener.

• Activation/deactivation the audible signals.

• An alarm if the appliance has a malfunction.

1) When the salt container is empty, the related indicator light does not come on while a washing programme operates.

Programme selection/cancel button

Use the programme selection/cancel button for these op-

erations:

• To set the washing programme. Refer to the chapter

'Setting and starting a washing programme'.

• To set the water softener. Refer to the chapter 'Setting

the water softener'.

• To deactivate/activate the audible signals. Refer to the

section 'Audible signals'.

• To cancel a washing programme in progress. Refer to

the chapter 'Setting and starting a washing pro-

gramme'.

Half-load button

The half-load option is not available for all washing pro-

grammes. Refer to the chapter 'Washing programmes'.

• Load dishes in the upper and lower basket.

• Decrease the detergent dosage when you use the half-

load option.

• Press the half-load button to set the option.

– The half-load indicator light comes on, when the

half-load option is selectable.

With the half-load button pressed the time duration

and the consumption of water and energy are re-

duced.

Setting mode

The appliance is in setting mode when all the programme

indicator lights are off and the end indicator light flashes.

The appliance must be in setting mode for these opera-

tions:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the audible signals.

If a programme indicator light is on, cancel the pro-

gramme to go back to the setting mode. Refer to the

chapter "Setting and starting a washing programme".

Programme indicator lights A and B

Apart the selection of the corresponding washing pro-

gramme, these lights have an auxiliary functions:

• The adjustment of the water softener level.

• Deactivation/activation of the audible signals.

Audible signals

You can hear an audible signal:

• At the end of the washing programme.

• When the appliance has a malfunction.

The activation of the audible signals is set at the factory.

Do these steps to deactivate the audible signals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting mode.

3. Press and hold the programme selection/cancel but-

ton until programme indicator light A flashes and

programme indicator light B comes on.

4. Press the programme selection/cancel button again.

– Programme indicator light A comes on.

– Programme indicator light B starts to flash.

5. Wait until programme indicator light A goes off.

– Programme indicator light B continues to flash.

– The end indicator light comes on.

The audible signals are activated.

6. Press the programme selection/cancel button again.

– The end indicator light goes off.

The audible signals are deactivated.

7. Switch off the appliance to save the operation.

Do these steps to activate the audible signals:

1. Do the above procedure until the end indicator light

comes on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zdt 112 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi zdt 112 Manual

Product: