521215
10
Zoom out
Zoom in
Previous page
1/32
Next page
All the programme indicators are on.
If the control panel shows other conditions,
press and hold function buttons (B) and (C) at
the same time until the appliance is in setting
mode.
Starting a programme without delay start
1. Open the water tap.
2. To set a programme, keep the appliance
door ajar.
3. Press the on/off button to activate the appli-
ance. The on/off indicator comes on.
4. Make sure that the appliance is in setting
mode.
5. Press the button of the programme you
want to set.
The related programme indicator comes
on.
The wash indicator comes on.
6. Close the appliance door. The programme
starts.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again until
the indicator of the number of hours you
want to set flashes. You can set 3, 6 or 9
hours.
3. Close the appliance door. The countdown
starts.
The delay indicator stops flashing.
The wash indicator goes off.
When the countdown is completed, the pro-
gramme starts.
The wash indicator comes on.
The delay indicator goes off.
You can set a programme and the delay
start also with the appliance door closed.
In this condition, you have only 3 seconds after
each setting before the appliance starts to op-
erate.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance contin-
ues from the point of interruption.
Cancelling the delay start
Press and hold function buttons (B) and (C) at
the same time until the delay indicator goes off
and all the programme indicators come on.
When you cancel a delay start, the appli-
ance goes back to setting mode. You have
to set the programme again.
Cancelling the programme
Press and hold function buttons (B) and (C) at
the same time until all the programme indica-
tors come on.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed, the end in-
dicator comes on and the wash indicator goes
off.
1. Press the on/off button to deactivate the
appliance. The on/off indicator goes off.
2. Close the water tap.
Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
First remove the items from the lower
basket, then from the upper basket.
There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
10
www.zanussi.com
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZDI15001XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDI15001XA in the language / languages: English, French as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZDI15001XA

Zanussi ZDI15001XA User Manual - German, Dutch, Portuguese, Turkish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info