551682
20
Zoom out
Zoom in
Previous page
1/76
Next page
3. Start the shortest programme with a rins-
ing phase, without detergent and without
dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to
start a programme.
Turn the programme knob until the programme
marker is aligned with a programme on the
control panel. If the on/off indicator comes on
and the start indicator starts to flash the appli-
ance is in setting mode.
If the control panel does not show this condi-
tion, press and hold the start button until the
appliance is in setting mode
Starting a programme without delay start
1. Open the water tap.
2. Close the appliance door.
3. Turn the knob until the programme marker
is aligned with the symbol of the pro-
gramme you want to set.
On/off indicator comes on.
Start indicator starts to flash.
4. Press Start to start the programme.
On/off indicator and start indicator are
on.
Starting a programme with delay start
1. Set the programme
2. Press the delay button to delay the start of
the programme of 3 hours.
The delay indicator comes on.
3. Press the start button to start the count-
down.
The start indicator comes on.
Opening the door while the appliance
operates
If you open the door, the appliance stops.
When you close the door, the appliance con-
tinues from the point of interruption.
Cancelling the delay start while the
countdown operates
1. Press and hold the start button until the
start indicator starts to flash.
2. Press the start button to start the pro-
gramme.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
Cancelling the programme
1. Press and hold the start button until the
start indicator starts to flash.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
At the end of the programme
When the programme is completed
comes on. If you do not deactivate the appli-
ance within 5 minutes all indicators goes off.
This helps to decrease energy consumption.
1. To deactivate the appliance, turn the knob
until the programme marker is aligned with
the on/off indicator.
2. Close the water tap.
Important
Let the dishes become cold before you re-
move them from the appliance. Hot dishes
can be easily damaged.
First remove the items from the lower bas-
ket, then from the upper basket.
There can be water on the sides and on the
door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
20
www.zanussi.com
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZDI12010XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDI12010XA in the language / languages: English, German, Dutch, French, Portuguese as an attachment in your email.

The manual is 15,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info