127960
28
Zoom out
Zoom in
Previous page
1/64
Next page
Fault code and malfunction Possible cause and solution
The programme does not start The appliance door is not closed.
Close the door.
Mains plug is not connected in.
Put in the mains.
The fuse has blown out in the household fuse box.
Replace the fuse.
Delay start is set.
Cancel the delay start to start the programme immediately.
After the check, switch on the appliance. The programme
continues from the point of interruption. If the malfunction
shows again, contact your Service Force Centre.
These data are necessary to help you quickly and cor-
rectly:
Model (Mod.)
Product number (PNC)
Serial number (S.N.)
For these data, refer to the rating plate.
Write the necessary data here:
Model description : ..........
Product number : ..........
Serial number : ..........
The cleaning results are not satisfactory
The dishes are not clean The selected washing programme is not applicable for the type of load and
soil.
The baskets are loaded incorrectly so that water cannot reach all surfaces.
Spray arms do not turn freely because of incorrect arrangement of the load.
The filters are dirty or not correctly installed.
The quantity of detergent is too little or missing.
Limescales particles on the dishes The salt container is empty.
The water softener is adjusted on a wrong level.
The salt container cap is not closed correctly.
The dishes are wet and dull No rinse aid has been used.
The rinse aid dispenser is empty.
There are streaks, milky spots or
a bluish coating on glasses and
dishes
Decrease the rinse aid dosage.
Dry water drop signs on glasses
and dishes
Increase rinse aid dosage.
The detergent can be the cause.
Technical data
Dimensions Width cm 59,6
Height cm 81,8-87,8
Depth cm 57,5
28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi zdi 112 x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zdi 112 x in the language / languages: Dutch as an attachment in your email.

The manual is 11,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info