Manual Zanussi ZDG 313 X (page 7 of 13) (English)

74464

Zoom out

Zoom in

1/13

Replacing the burner injectors

1. Remove the pan supports.

2. Remove the burner's caps and crowns.

3. With a socket spanner 7 unscrew and remove the

injectors (Fig. 6), and replace them with the ones

required for the type of gas in use (see Table 2).

4. Reassemble the parts, following the same procedure

backwards.

5. Replace the rating label (placed near the gas supply

pipe) with the relevant one for the new type of gas

supply. You can find this label in the package of the

injectors supplied with the appliance.

Should the feeding gas pressure be different or variable

compared with the required pressure, an appropriate

pressure adjuster must be fitted on the gas supply pipe,

in compliance with the rules in force.

Adaptation to different types of gas

Fig. 6

FO 0392

Adjusting the minimum level

To adjust the minimum level of the burners, proceed as

follows:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the knob.

4. With a thin screwdriver, adjust the by-pass screw

(see Fig. 7). If changing from natural gas to LPG,

completely tighten clockwise the screw, until a small

regular flame is obtained.

5. Finally check the flame does not go out when quickly

turning the knob from the maximum position to the

minimum position.

This procedure can easily be carried out, anyhow the hob

has been positioned or built in the working top.

BURNER NORMAL REDUCED NORMAL

POWER POWER POWER

kW kW NATURAL GAS LPG

G20/G25 20/25 mbar 28-30/37 mbar

inj. 1/100 m

/h inj. 1/100 g/h - G30 g/h - G31

Ultra-Rapid 4,0 1,2 146 0,381 98 291 286

Burner Ø By-pass

in 1/100

of mm.

Ultra-Rapid 56

Table 1 : BY-pass diameters

Table 2 : injectors

Fig. 7

By-pass screw

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDG 313 X in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZDG 313 X

Zanussi ZDG 313 X User Manual - Dutch - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanussi ZDG 313 X Manual

Product: