626613
4
Zoom out
Zoom in
Previous page
1/52
Next page
Indicator lights
End-of-programme Comes on when the washing programme is completed.
Multitab Comes on when you activate the multitab function. Refer to 'Multitab function'.
Salt
1)
Comes on when it is necessary to fill the salt container. Refer to 'Use of dishwash-
er salt'.
After you fill the container, the salt indicator light can continue to stay on for some
hours. This does not have an unwanted effect on the operation of the appliance.
Rinse aid
1)
Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse
aid'.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme
operates.
Programme selection buttons
With these buttons you can select the washing pro-
gramme. Press a programme button, the related indica-
tor light comes on. Refer to 'Washing programmes' chap-
ter for more data about the washing programmes.
Delay start button
Use the delay start button to delay the start of the wash-
ing programme with an interval between 1 and 19
hours. Refer to the chapter 'Setting and starting a wash-
ing programme'.
Digital display
The display shows:
the set level of the water softener.
Remaining time to the end of the programme.
Activation/deactivation of the rinse aid dispenser (on-
ly with multitab function on).
End of the washing programme. The display shows a
zero.
Number of hours in delay start.
Fault codes.
Function buttons
Use the function buttons for these operations:
To set the water softener. Refer to the chapter 'Setting
the water softener'.
To cancel the washing programme in progress or a
delay start in progress. Refer to the chapter 'Setting
and starting a washing programme'.
To activate/deactivate the multitab function. Refer to
the chapter 'Multitab function'.
To deactivate/activate the rinse aid dispenser, when
multitab function is active. Refer to the chapter 'Mul-
titab function'.
Setting mode
The appliance must be in setting mode for these
operations:
To set a washing programme.
To set the water softener level.
To deactivate/activate the rinse aid dispenser.
Press the on/off button. The appliance is in setting
mode when:
All the programme indicator lights come on.
Press the on/off button. The appliance is not in setting
mode when:
Only one programme indicator light comes on
A washing programme is set. It is necessary to can-
cel the programme to go back to the setting mode.
Refer to the chapter 'Setting and starting a washing
programme".
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZDF4010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZDF4010 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanussi ZDF4010

Zanussi ZDF4010 User Manual - German, Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info