128169
54
Zoom out
Zoom in
Previous page
1/68
Next page
Indicator lights
Rinse aid
1)
Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme
operates.
Programme knob
To switch on the appliance or to set a washing pro-
gramme, turn the programme knob clockwise or coun-
terclockwise. The programme marker on the pro-
gramme knob must agree with one of the washing pro-
grammes on the control panel. If the programme mark-
er agrees with a washing programme, the digital dis-
play shows the time duration of the programme. If the
programme marker does not agree with a washing
programme, the digital display shows two horizontal
bars.
To switch off the appliance, turn the programme knob
until the programme marker agrees with the off indi-
cator.
Use the programme knob for these operations:
To set the water softener. Refer to 'Setting the water
softener'.
To deactivate/activate the rinse aid dispenser. Refer to
'Multitab function'.
Start/cancel button
Use the start/cancel button for these operations:
To start the washing programme. Refer to the chapter
'Setting and starting a washing programme'.
To cancel a washing programme in progress. Refer to
the chapter 'Setting and starting a washing pro-
gramme'.
To set the water softener level. Refer to the chapter 'Set
the water softener'.
To deactivate/activate the rinse aid dispenser. Refer to
the chapter 'Multitab function'.
Multitab button
Press this button to activate/deactivate the multitab func-
tion. Refer to the chapter 'Multitab function'.
Delay start button
Use the delay start button to delay the start of the washing
programme with an interval between 1 and 19 hours. Refer
to the chapter 'Setting and starting a washing pro-
gramme'.
Digital display
The display shows:
Adjusted level of the water softener.
Activation/deactivation of the rinse aid dispenser (only
with multitab function on).
Programme duration.
Remaining time to the end of the programme.
End of a washing programme, the digital display shows
a zero.
Number of hours in delay start.
Fault codes.
Setting mode
The appliance is in setting mode when:
One or more phase indicator lights are on.
The time duration of the programme flashes in the
digital display.
The appliance must be in setting mode for these opera-
tions:
To set a washing programme.
To set the water softener level.
To deactivate/activate the rinse aid dispenser.
The appliance is not in setting mode when:
One or more phase indicator lights are on.
The time duration of the programme does not flash.
In this condition cancel the programme to go back to the
setting mode. Refer to the chapter 'Setting and starting a
washing programme'.
54
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi zdf 3020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi zdf 3020 in the language / languages: Dutch as an attachment in your email.

The manual is 12,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info