765923
14
Zoom out
Zoom in
Previous page
1/32
Next page
Automatic
light Boiling1) Frying2)
Mode
H6 On Fan
speed 2 Fan
speed 3
1) The hob detects the boiling process and acti-
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and activates
fan speed in accordance with automatic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch until you hear a beep and keep it
pressed until you hear the second beep.
3. Touch for 3 seconds until or comes
on.
4. Touch until H and a digit (0 - 6) comes on.
H5 is the default setting.
5. Touch of the Timer to select the desired
mode (H0 - H6). The chosen mode activates
automatically after 10 seconds.
To operate the hood directly on the
hood panel deactivate the automatic
mode of the function.
When you finish cooking and
deactivate the hob, the hood fan may
still operate for a certain period of
time. After that time the system
deactivates the fan automatically and
prevents you from accidental
activation of the fan for the next 30
seconds.
Operating the fan speed manually
You can also operate the function manually. To do
that touch when the hob is active. This
deactivates automatic operation of the function and
allows you to change the fan speed manually.
When you press you raise the fan speed by one.
When you reach an intensive level and press
again you will set fan speed to 0 which deactivates
the hood fan. To start the fan again with fan speed
1 touch .
To activate automatic operation of the
function, deactivate the hob and
activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob. To do
so set the automatic mode to H1 – H6.
The light on the hood deactivates 2
minutes after deactivating the hob.
POWER MANAGEMENT FUNCTION
All cooking zones are connected. See the
illustration.
The hob and both ovens are connected to one
phase.
The phase has a maximum electricity load.
The function divides the power in the appliance.
The oven is more important than the hob.
The function activates when the total electricity
load in the appliance is exceeded.
The function reduces the power of the cooking
zones to prevent a circuit overload.
The heat setting display of the reduced zones
changes between two levels.
HOB - HINTS AND TIPS
WARNING! Refer to Safety chapters. COOKWARE
For induction cooking zones a strong
electro-magnetic field creates the heat
in the cookware very quickly.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZCI66280BA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZCI66280BA in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info