551962
22
Zoom out
Zoom in
Previous page
1/60
Next page
CAUTION!
Do not pull, move or damage any
pipes and/or cables inside the
cabinet. Never use detergents,
abrasive powders, highly perfumed
cleaning products or wax polishes to
clean the interior as this will damage
the surface and leave a strong
odour. Take care of not to damage
the cooling system.
Clean the condenser and the compressor at the
back of the appliance with a brush. This
operation will improve the performance of the
appliance and save electricity consumption.
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap so
as to remove the typical smell of a brand-new
product, then dry thoroughly.
Do not use detergents or abrasive
powders, as these will damage the
finish.
Defrosting of the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
every time the motor compressor stops, during
normal use. The defrost water drains out
through a trough into a special container at the
back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside.
Use the special cleaner provided, which you will
find already inserted into the drain hole.
Defrosting the freezer
CAUTION!
Never use sharp metal tools to
scrape off frost from the evaporator
as you could damage it. A
temperature rise of the frozen food
packs, during defrosting, may
shorten their safe storage life. Do
not use a mechanical device or any
artificial means to speed up the
thawing process other than those
recommended by the manufacturer.
A certain amount of frost will always form on the
freezer shelves and around the top
compartment.
Defrost the freezer when the frost layer reaches
a thickness of about 3-5 mm.
1. Pull out the plug from the wall socket or
switch off the appliance.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place
CAUTION!
Do not touch frozen goods with wet
hands. Hands can freeze to the
goods.
3. Open the door.
In order to speed up the defrosting process,
place a pot of warm water in the freezer
compartment. In addition, remove pieces of ice
that break away before defrosting is complete.
4. When defrosting is completed, dry the
interior thoroughly.
5. Switch on the appliance.
6. Set the temperature regulator to obtain the
maximum coldness and run the appliance
for two or three hours using this setting.
7. Reload the previously removed food into the
compartment.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
Disconnect the appliance from
electricity supply
Remove all food
Defrost (if foreseen) and clean the appliance
and all accessories
Leave the door/doors open to prevent
unpleasant smells.
22 www.zanussi.com
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi ZBA30455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi ZBA30455 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info