314780
14
Zoom out
Zoom in
Previous page
1/23
Next page
14
7. Select the DELAY START
Before you start the programme, if you wish the
starting to be delayed, press the DELAY START
button repeatedly, to select the desired delay.
The relevant light illuminates.
8. Start the programme
To start the selected programme, press the
START/PAUSE button; the corresponding light
stops flashing.
The light illuminates.
If you have chosen a delayed start, the machine will
begin the countdown.
9. How to change an option or a
programme during its cycle
It is possible to change any option before the
programme carries it out. Before you make any
change, you must pause the washing machine by
pressing the START/PAUSE button .
Changing a running programme is
possible only by resetting it. Turn the programme
selector dial to O and then to the new programme
position. The washing water in the tub will not
emptied out. Start the new programme by
depressing the START/PAUSE button .
10. Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running, the corresponding light
starts to flash. Depress the button again to restart the
programme.
12 H
2 H
4 H
8 H
11. Cancelling a programme
Turn the selector dial to O to cancel a programme
which is running. Now you can select a new
programme.
12. Opening the door after the
programme has started
First set the machine to PAUSE by pressing the
START/PAUSE button.
If the door does not open, after about 2 minutes, this
means that the machine is already heating, that the
water level is above the bottom edge of the door or
that the drum is turning.
If you cannot open the door but you need to open it
you have to switch the machine off by turning the
selector dial to “O”. After about 2 minutes the door can
be opened (pay attention to the water level and
temperature!).
13. At the end of the programme
The machine stops automatically. The
START/PAUSE light and the pilot light go out.
The pilot light light up.
If the Anti-crease option has been selected, the
End pilot light remains lit and the door is locked
to indicate that the water must be emptied out before
opening the door.
To do this turn the programme selector dial to “O”
and then to programme Q (drain) or R
(spin). The spin
programme is performed at the maximum speed. In
order to avoid any creasing in synthetic, delicate and
wool items, the spin speed can be reduced by
means of the relevant selector.
Switch the machine off by turning the programme
selector dial to “O”.
Wait approx. two minutes before opening the door to
give the electric locking mechanism time to release
it.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
132995650 gb.qxd 27/05/2005 12:07 Pagina 14 (Nero/Process Black pellicola)
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanussi fae 1025 v at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanussi fae 1025 v in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info