48
After unscrewing turn over the pin in the door holder
plate in the direction of the arrow.
Fit and fix the door holder plate on the other side
without displacing the door.
Put back the plastic top on the fixing elements and
pull it forward.
Fix the top with the screws (2 pieces) on the back
side of the box.
Put over the handle and the plastic nails on the other
side.
Put the appliance to its place, set it level and plug it
into the mains socket.
Change of door opening direction
of frozen food compartment
After changing the outer door opening direction at this
type it is necessary to remount the door of the frozen
food compartment as well.
Operations and their order can be seen in figure.
Press the retaining lever inside the lower doorhinge
Tilt the lower doorhinge out together with the freezer
compartment door then remove it from the pin of the
freezer compartment door.
Remove the rectangular plug and put it into the
opening got free on the other side.
Having the freezer compartment door turned by
180° put the lower hinge onto the lower pin of the
freezer compartment door.
Put the upper hinge pin of the freezer compartment
door into the free opening, then push the lower hinge
into its place together with the freezer compartment
door.
In case you do not want to perform the procedures
above, call the nearest brand-mark service. Technicians
will accomplish the refitting expertly for charge.
GB
Electrical connection
This refrigerator is designed to operate on a
230 V AC (
~
) 50 Hz supply.
The plug must be put into a socket with protective
contact. If there is no such, it is recommended to get
an electrician to fit an earthed socket in compliance
with standards near the refrigerator.
This appliance complies with the following E.E.C.
Directives:
73/23 EEC of 19.02.73 (Low Voltage Directive) and
subsequent modifications,
89/336 EEC of 03.05.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
