8
Internal cleaning
Ensure that the seals around the door, the detergent and
rinse aid dispensers are cleaned regularly with a damp
cloth.
We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes using
detergent. Regular use of Finish Dishwasher Cleaner
cleans inaccessible parts, eliminates unpleasant food
odours and helps prevent the build-up of limescale.
Cleaning the filters
The filters in the base of the washing compartment are to
large extent self-cleaning. Nevertheless the filters should
be checked and cleaned from time to time. Dirty filters will
degrade the washing result.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a coarse/fine
filter, microfilter and a flat filter.
Unlock the filter system using a handle on the
microfilter, and remove.
3. Turn the handle about
1
/
4
a turn anticlockwise and
remove.
4. Take hold of the coarse/fine filter (A - 1/2) (B - 1) by the
handle with the hole and remove from the microfilter
(A - 3) (B - 2).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (A - 4) (B - 3) from the base of
the washing compartment and clean both faces
thoroughly.
7. Put the flat filter back in the base of the washing
compartment.
8. Place the coarse/fine filter in the microfilter and press
together.
9. Put the filter combination in place and lock by turning
the handle clockwise to the stop. During this process
ensure that the flat filter does not protrude above the
base of the washing compartment.
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the filters
will produce poor washing results.
Cleaning the filters is vital to ensure correct
operation of the machine.
