Manual Zanker ZKK 8416 K (page 16 of 56) (English, German, Dutch, French)

483781

Zoom out

Zoom in

1/56

squashed or damaged power plug may overheat

and cause a fire.

3. Make sure that you can come to the mains plug

of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not insert

the power plug. There is a risk of electric shock

or fire.

6. You must not operate the appliance without the

lamp cover

of interior lighting.

• This appliance is heavy. Care should be taken when

moving it.

• Do not remove nor touch items from the freezer

compartment if your hands are damp/wet, as this

could cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct

sunlight.

•

Bulb lamps

used in this appliance are special pur-

pose lamps selected for household appliances use

only. They are not suitable for household room illu-

mination.

Daily Use

• Do not put hot pot on the plastic parts in the appli-

ance.

• Do not store flammable gas and liquid in the appli-

ance, because they may explode.

• Do not place food products directly against the air

outlet on the rear wall.

• Frozen food must not be re-frozen once it has been

thawed out.

• Store pre-packed frozen food in accordance with the

frozen food manufacturer's instructions.

• Appliance's manufacturers storage recommenda-

tions should be strictly adhered to. Refer to relevant

instructions.

• Do not place carbonated or fizzy drinks in the freezer

compartment as it creates pressure on the container,

which may cause it to explode, resulting in damage

to the appliance.

• Ice lollies can cause frost burns if consumed straight

from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and

disconnect the mains plug from the mains socket.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the

appliance. Use a plastic scraper.

• Regularly examine the drain in the refrigerator for

defrosted water. If necessary, clean the drain. If the

drain is blocked, water will collect in the bottom of

the appliance.

Installation

Important! For electrical connection carefully follow the

instructions given in specific paragraphs.

• Unpack the appliance and check if there are dam-

ages on it. Do not connect the appliance if it is dam-

aged. Report possible damages immediately to the

place you bought it. In that case retain packing.

• It is advisable to wait at least four hours before con-

necting the appliance to allow the oil to flow back in

the compressor.

• Adequate air circulation should be around the appli-

ance, lacking this leads to overheating. To achieve

sufficient ventilation follow the instructions relevant

to installation.

• Wherever possible the back of the product should be

against a wall to avoid touching or catching warm

parts (compressor, condenser) to prevent possible

burn.

• The appliance must not be located close to radiators

or cookers.

• Make sure that the mains plug is accessible after the

installation of the appliance.

•

Connect to potable water supply only.

Service

• Any electrical work required to do the servicing of the

appliance should be carried out by a qualified electri-

cian or competent person.

• This product must be serviced by an authorized

Service Centre, and only genuine spare parts must

be used.

6) If the lamp cover is foreseen.

7) If the lamp is foreseen.

8) If the appliance is Frost Free.

9) If a water connection is foreseen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker ZKK 8416 K in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker ZKK 8416 K Manual

Product: