Manual Zanker ZKC 9141 (page 58 of 76) (English, German, Dutch, French)

528964

Zoom out

Zoom in

1/76

Mounting accessories included

2 screwdriver bits (for TORX screws).

1 deflector ,

1 reduction flange Ø 125-120 mm ,

1 chimney support,

5 wood-screws 5 x 45 mm (for wall mounting) ,

5 Wall dowels Ø 8 mm (for wall mounting) ,

2 washers

2 screws 3 x 9 (2 to fix the upper chimney)

1 metal screw 2,9 x13 (to fix the deflector).

Electrical connection

Safety warnings for the electrician

The mains power supply must correspond to the rating indicated on the plate situated inside the

hood. If provided with a plug connect the hood to a socket in compliance with current regulations

and positioned in an accessible area. If it not fitted with a plug (direct mains connection) or if the

plug is not located in an accessible area apply a bi-polar switch in accordance with standards which

assures the complete disconnection of the mains under conditions relating to over-current category

III, in accordance with installation instructions.

IMPORTANT: Before re-connecting the hood circuit to the mains supply and checking the efficient

function, always check that the mains cable is correctly assembled.

IMPORTANT! Power cable replacement must be undertaken by the authorized service assistance

centre or similar qualified person.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker ZKC 9141 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker ZKC 9141 Manual

Product: