Manual Zanker ZKB7630 (page 23 of 72) (English, German, Dutch, French)

528925

Zoom out

Zoom in

1/72

Set function

and maximum temperature.

4. Run an empty oven for 15 minutes.

This is to burn off any residue from the cavity surface.

Accessories can become more hot than in normal use.

During this period an odour and smoke can be emitted.

This is normal. Make sure the airflow is sufficient.

Daily use

Warning! Refer to "Safety information" chapter.

The display

1 2 3

1 Cooking function

2 Temperature

3 Time

Button Function Description

ON/OFF To switch the appliance on or off.

SELECTOR To set the oven function.

RAPID HEAT UP To switch the rapid heat-up function on.

PYROLYTIC CLEANING To start the Pyrolytic cleaning.

PLUS, MINUS To adjust the values (temperature and time).

CLOCK To set the clock function.

Setting the oven function

Push

again and again until the symbol for the

necessary oven function flashes.

The display shows an automatic temperature. If

you do not change the temperature in approximate-

ly 5 seconds, the appliance starts to operate.

To change the temperature, push

or button.

If there is a power cut, the programmer keeps all

the settings for approximately 3 minutes. After

more than 3 minutes without power supply, you have to

do the settings (also the time of day) again.

If you start an oven function, the symbol of the

temperature

flashes.

The symbol shows that the temperature in the appli-

ance increases.

When the appliance is at the set temperature, an

acoustic signal sounds and the symbol of the tempera-

ture stops to flash.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Zanker ZKB7630 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Zanker ZKB7630 Manual

Product: