528921
24
Zoom out
Zoom in
Previous page
1/52
Next page
24 electrolux
24
Instructions for the Installer
Installation and connection must be
carried out in compliance with the
regulations in force. Any interventions
must be carried out when the appliance is
switched off. Only accredited engineers
may work on the appliance.
The manufacturer disclaims any liability if
the safety measures are not observed.
Connecting to the electrical supply
Before connecting to the electrical supply, please make
sure:
- The fuse and the domestic electrical installation must
be designed for the max. load of the appliance (see
rating plate).
- The domestic electrical installation must be equipped
with a proper earth connection in accordance with
the regulations in force.
- The socket or the multi-pole off switch must be easy
to access after the appliance has been installed.
This appliance is supplied with a connection cable
incorporating a standard plug, suitable for the total electric
load shown on the rating plate. The plug is to be inserted
into a suitable wall socket. If you require a direct connec-
tion to the electric network (mains), it will be necessary
to fit between the appliance and the mains an omnipole
switch, with a minimum gap between contacts of 3 mm,
suitable for the required load and in compliance with
rules in force. The green & yellow ground wire must not
be interrupted by the switch and it should be 2-3 cm.
longer than the other cables.
The mains cable and plug as supplied are to be
connected to a shockproof socket (230 V~, 50 Hz). The
shockproof socket must be installed in accordance with
the regulations.
The following types of mains cable are suitable,
taking the necessary rated cross section into account:
H07 RN-F, H05 RN-F, H05 RR-F, H05 VV-F, H05
V2V2-F (T90), H05 BB-F.
The connection cable must in any case be laid out
so that at no point does it reach 50°C (over room
temperature).
After the connection has been carried out, the heating
elements must be tested by being operated for about 3
minutes.
Terminal block
The oven is fitted with an easily accessible terminal
block which is designed to operate with a single-phase
power supply of 230 V (Fig. 9).
Letter L - Live terminal
Letter N - Neutral terminal
or E - Earth terminal
Fig. 9
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker ZKB 7628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker ZKB 7628 in the language / languages: English, French as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanker ZKB 7628

Zanker ZKB 7628 User Manual - German, Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info