528936
24
Zoom out
Zoom in
Previous page
1/32
Next page
Unscrew the hose
from the appliance.
Keep a towel nearby
because some water
may flow.
Clean the filter in the
valve with a stiff brush
or with the piece of
cloth.
Screw the hose back to the appliance and make
sure the connection is tight.
Turn on the water tap.
What to do if…
The appliance does not start or stops during operation.
Certain problems are due to lack of simple mainte-
nance or oversights, which can be solved with the help
of the indications described in the charts, without calling
out an engineer.
During appliance operation it is possible that the red
pilot light of the button 9 flashes, the display shows a
fault code and the buzzer sounds to indicate that the
appliance is not working.
Before contacting your local Service Centre, please
carry out the checks listed below.
Fault code and malfunc-
tion
Possible cause / Solution
Problem with the water
supply
The water tap is closed.
Open the water tap.
The inlet hose is squashed or kinked.
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
Clean the water inlet filters (read "Cleaning the water inlet filters" for more de-
tails).
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KWF71411WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KWF71411WE in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanker KWF71411WE

Zanker KWF71411WE User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info