129830
12
Zoom out
Zoom in
Previous page
1/44
Next page
12
Part 1 - INSTALLATION INSTRUCTIONS
2 - INSTALLATION INSTRUCTIONS
Some installation systems require the opening and removal of the metal grille panel.
2.1 - Instructions for opening and removing the metal grille panel
To open the grille panel, press inwardly on the two slider catches at each side of the
grille panel and the grille will pivot down. To remove the metal grille, pull forward on
the right hand side so that the hinge pin on the back of the grille will be released from
the slot in the side of the casing.
2.2 - Wall cabinet fixing
a)Predrilled wall cabinet: fix the hood onto the wall cabinet base panel using the four
screws 4.2 x 45 mm (supplied with the fixing kit). It is not necessary to open the
metal grille.
b)No predrilled wall cabinet:
b.1 - If the hood is provided with a paper fixing template, follow the instructions.
b.2 - If the hood is not provided with a paper fixing template, position the hood on the
wall cabinet base panel and pilot drill the 3.5 x 16 mm screws (not supplied with the
fixing kit) from the inside onto the wood.
2.3 - Wall mounting
a)Drill two Ø 8 mm holes on the wall using the paper template, insert two rawl plugs
and two 4.2 x 44,4 mm screws leaving 5 mm untightened. Open the metal grille
panel, hook the hood on and fully tighten the screws.
b)If the hood is not provided with a paper fixing template, drill two Ø 8 mm holes (see
draw.), insert the plugs and screws, proceeding as directed under paragraph a.
c)For wall mounting using wallbrackets (optional), follow the instructions of the fixing
template.
d)Pay attention to the safety regulation of point 1. 6 .
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker krt 60 b n w at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker krt 60 b n w in the language / languages: English, German, Dutch, French, Italian, Portuguese, Finnish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info