528970
8
Zoom out
Zoom in
Previous page
1/44
Next page
Symbol Function Description
End To set when the appliance must be deactivated. First set an oven function be-
fore you set this function. You can use Duration and End at the same time
(Time Delay) to set the time when the appliance must be activated and then
deactivated.
Press again and again to change the clock
function.
Press
to confirm the settings of the clock func-
tions, or wait 5 seconds for the setting to be con-
firmed automatically.
Setting the Duration or End function
1.
Press
again and again until the symbol or
flashes in the display.
2. Press + or - to set the minutes.
3.
Press
to confirm.
4. Press + or - to set the hour.
5.
Press
to confirm.
6.
When the set time ends, the symbol
or
and the set time flash. The acoustic signal sounds
for two minutes. The appliance deactivates. Press
a button or open the appliance door to stop the
signal.
If you press
while setting the time for Duration
, the appliance switches to setting the End
function.
Setting the Minute Minder
Used to set a countdown time. The maximum time you
can set is 23 hours 59 minutes. This function has no ef-
fect on the operation of the oven. You can set the Mi-
nute Minder at any time, also if the appliance is off.
1.
Press
again and again until and 00 flash in
the display.
2. Press + or - to set the Minute Minder. At first the
time is calculated in minutes and seconds. When
the time you set is longer than 60 minutes, the
symbol
comes on in the display. The appli-
ance then calculates the time in hours and mi-
nutes.
3. The Minute Minder starts automatically after five
seconds.
4. When the set time ends, the acoustic signal
sounds for two minutes. 00:00 and
flash in the
display. Press a button to stop the signal.
If you set the Minute Minder when the Duration
or End function operates, the symbol
comes on in the display.
Count Up Timer
Use the Count Up Timer to monitor how long the oven
operates. It is on immediately when the oven starts to
heat.
To reset the Count Up Timer, press and hold + and -.
The timer starts to count up again.
You cannot use the Count Up Timer when the Du-
ration
or End function operates.
Additional functions
Child Lock
When the Child Lock is on, you cannot operate the
oven. This is to make sure that children do not acciden-
tally activate the appliance.
Activating and deactivating the Child Lock function:
1. Do not set an oven function.
2.
Press and hold
and + at the same time for two
seconds.
3.
An acoustic signal sounds. SAFE and
come on
or go out in the display (when you activate or de-
activate the Child Lock).
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KOB57602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KOB57602 in the language / languages: English, German as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Zanker KOB57602

Zanker KOB57602 User Manual - Dutch, French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info