528994
15
Zoom out
Zoom in
Previous page
1/36
Next page
2. Clean the appliance with a moist cloth and some
detergent.
3. At the end rub the appliance dry with a clean
cloth.
Troubleshooting
Problem Possible cause Remedy
You cannot activate or operate the
appliance.
The appliance is not connected to
an electrical supply or it is connec-
ted incorrectly.
Check if the appliance is correctly
connected to the electrical supply
(refer to connection diagram).
Problem with the house electrical
system.
Examine the fuse in the electrical
system of the house in the fuse
box. If the fuses blow again and
again, speak to qualified electrician.
The residual heat indicator does not
come on.
The cooking zone is not hot be-
cause it operated only for a short
time.
If the cooking zone operated suffi-
ciently long to be hot, speak to the
service centre.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the customer service.
Give the data from the rating plate, three digit letter
code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on.
Make sure, you operated the appliance correctly. If not
the servicing by a customer service technician or dealer
will not be free of charge, also during the warranty peri-
od. The instructions about the customer service and
conditions of guarantee are in the guarantee booklet.
Installation
Warning! Refer to the Safety chapters.
Before the installation, note down the serial
number (Ser. Nr.) from the rating plate.The rating
plate of the appliance is on its lower casing.
KEV6140FBB
949 594 301 00
58 PEE 11 AO
ZANKER
220-240 V 50-60 Hz
6 kW
Built-in appliances
Only use the built-in appliances after you assemble
the appliance into correct built-in units and work sur-
faces that align to the standards.
Connection cable
The appliance is supplied with the connection cable.
Replace the damaged mains cable with a special ca-
ble (type H05BB-F Tmax 90°C; or higher). Speak to
your local Service Centre.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KEV6140FBB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KEV6140FBB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info