528997
10
Zoom out
Zoom in
Previous page
1/32
Next page
Never try to extinguish a fire with water, but switch off the appliance and then
cover flame e.g. with a lid or a fire blanket.
Do not store items on the cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Metallic objects such as knives, forks, spoons and lids should not be placed
on the hob surface since they can get hot.
If the glass ceramic surface is cracked, switch off the appliance to avoid the
possibility of electric shock.
Safety instructions
Installation
Warning! Only a qualified person must install this
appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with the ap-
pliance.
Keep the minimum distance from the other applian-
ces and units.
Always be careful when you move the appliance be-
cause it is heavy. Always wear safety gloves.
Seal the cut surfaces with a sealant to prevent mois-
ture to cause swelling.
Protect the bottom of the appliance from steam and
moisture.
Do not install the appliance adjacent to a door or un-
der a window. This prevents hot cookware to fall
from the appliance when the door or the window is
opened.
If the appliance is installed above drawers make
sure that the space, between the bottom of the appli-
ance and the upper drawer, is sufficient for air circu-
lation.
The bottom of the appliance can get hot. We recom-
mend to install a non-combustile separation panel
under the appliance to prevent access to the bottom.
Electrical connection
Warning! Risk of fire and electrical shock.
All electrical connections must be made by a quali-
fied electrician.
The appliance must be earthed.
Before carrying out any operation make sure that the
appliance is disconnected from the power supply.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure the mains cable or plug (if applicable)
does not touch the hot appliance or hot cookware,
when you connect the appliance to the near sockets
Make sure the appliance is installed correctly. Loose
and incorrect electricity mains cable or plug (if appli-
cable) can make the terminal become too hot.
Make sure that a shock protection is installed.
Use the strain relief clamp on cable.
Make sure not to cause damage to the mains plug (if
applicable) or to the mains cable. Contact the Serv-
ice or an electrician to change a damaged mains ca-
ble.
The electrical installation must have an isolation de-
vice which lets you disconnect the appliance from
the mains at all poles. The isolation device must
have a contact opening width of minimum 3 mm.
Use only correct isolation devices: line protecting
cut-outs, fuses (screw type fuses removed from the
holder), earth leakage trips and contactors.
Use
Warning! Risk of injury, burns or electric shock.
Use this appliance in a household environment.
Do not change the specification of this appliance.
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zanker KAV6040XXK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zanker KAV6040XXK in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info