669140
2
Zoom out
Zoom in
Previous page
1/4
Next page
INSERTING/REMOVING YOUR iPAD®
TROUBLESHOOTING
If your iPad® does not respond to your Cover there may be a simple
explanation such as a dead battery or an unsuccessful pairing. Please use
the following to help troubleshoot your situation. If none of the following
solve your issue, then please contact ZAGG customer service and one of
our trained professionals will be happy to assist you.
1. Restart your iPad by holding down the home and power button
simultaneously until it restarts. Let go of the buttons when you see the
Apple logo.
2. Turn your Cover o and back on. You should see the LED status light
illuminate briefly, if not, charge your Cover.
3. After charging, turn your Cover on. If the LED status light does not
illuminate, and your keyboard doesn’t operate correctly, please contact
ZAGG’s customer support.
4. Forget and re-pair your Cover. On your iPad, select: Settings > General
> Bluetooth > On. If you see “ZAGGkeys Cover” listed as an available
device, touch the arrow to the right of it and choose to have your iPad
forget the device.
5. Push the PAIR button on your Cover and watch for the LED status light
to flash blue.
6. Your iPad should display “ZAGGkeys Cover” as an available device.
Select it.
7. If your iPad gives you an error message, repeat the pairing process.
8. If you still can’t get your Cover to pair, it is possible your iPad needs to
have its software updated.
To update your iPad’s software, follow these steps:
1. Plug your iPad into your computer, and open iTunes®.
2. In iTunes, select your iPad.
3. Choose to check for software updates.
4. If an update is available, please install it. This will take a few minutes to
download from Apple®.
5. After your update is complete, repeat the troubleshooting process*.
* If you continually receive the same error message during pairing, or the above steps don’t work, please
contact ZAGG’s customer support for assistance.
To insert your iPad mini into the Cover,
start with the Cover’s keyboard in portrait
orientation with the hinge closed and on
the left. Then, with your iPad in portrait
mode and the volume control buttons
facing out (the Home button is on the
top), slide it into the hinge channel,
making sure it is firmly in place. For best
results, always insert your iPad with the
hinge closed and align its edges with your
Cover’s keyboard.
When your iPad is secure in the Cover,
you can open it, and cleverly placed
magnets, will activate your iPad’s
sleep/wake feature to help preserve
battery life. Simply open your Cover to
wake your iPad.
To easily remove your iPad, start with the
hinge closed. Open the hinge slightly
(enough that you can grasp the corner of
your iPad) and while securing the Cover,
pull your iPad away from the hinge.
To insert your iPad using the media mode,
start with the Cover’s keyboard in portrait
orientation with the hinge closed and on
the left. Then, with your iPad also in
portrait orientation (the Home button is
on the bottom), slide your iPad into the
hinge channel, making sure it is firmly in
place*. You will feel the magnets engage,
securing your device.
*NOTE: When your iPad is in media mode, it is somewhat
less secure in the channel as when in regular mode. Use
care when transporting it in this mode.
Volume Controls
Home Button
Volume Controls
Home Button
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Zagg Cover - iPad at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Zagg Cover - iPad in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info