743392
4
Zoom out
Zoom in
Previous page
1/26
Next page
PG 4
What wires do you have?
Make sure your wires are labeled. This may require you to nd the ‘other
end’ connection for each wire on your heating or air conditioning equipment and read the label there. Refer to
the Wire Reference page at end of install section for better understanding of wire labels from different HVAC
system makers.
IMPORTANT: The CT110 runs on 4 AA alkaline batteries and/or the C wire if
available. If you do not have a C wire you can run a new wire from the HVAC or
use a standard 12-24V [AC or DC] wall transformer. A constant power source is
required when using a radio module.
IMPORTANT: If you have both RH and RC you need to remove the jumper wire between these 2 terminals.
Prepare Wires
Please follow these guidelines for safe and secure wire connections:
• You will need at least 2.6” of wire for each of your connections to the CT110.
• If you do not have enough wire, splice additional wire to allow enough slack.
• Terminals accept wires from 16-22awg.
• Fan out wires below the hole as shown.
• Remove insulation 1/8” from the tip of each wire.
• When handling, take care not to damage the labels for each wire.
Caution
Do not allow wires to touch each other or parts on thermostat.
Jumper
wire
Y
RH RC
G A
Y2
Wire Terminals
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Z-Wave CT110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Z-Wave CT110 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info