633014
22
Zoom out
Zoom in
Previous page
1/29
Next page
21
UPDATE
UPDATE THE ST16 GROUND STATION
STEP 1) Download the Firmware update document and unpack it.
Copy the firmware document into the Micro SD card.
STEP 2)
Plug the Micro SD card into the ST16 Ground Station, and
switch on the Ground Station.
STEP 3)
Tap the 'System Settings' , and if required press 'OK' to
accept any pop up warnings/alerts.
STEP 4)
Tap the 'About Controller' and press the 'UPDATE' in the
ST16 column, and it will update automatically.
NOTICE:
When the update process completes, the ST 16 Ground
Station will restart automatically.
UPDATE THE TYPHOON H AIRCRAFT
STEP 1) Download the Firmware update document and unpack it.
Copy the firmware document into the Micro SD card.
STEP 2)
Plug the Micro SD card into the CGO3+, and switch on the
ST16 Ground station and the TYPHOON H.
STEP 3)
Wait all the connections are established. Tap the 'System
Settings' , and if required press 'OK' to accept any pop up
warnings/alerts.
STEP 4)
Tap the 'About Controller' and press the 'UPDATE' in the
TYPHOON H column, and it will update automatically.
NOTICE:
When the update process completes, the ST 16 Ground
Station will pop up tips to restart the TYPHOON H manually.
GIMBAL CAMERA CALIBRATION
STEP 1) Place the TYPHOON H on a level and stable surface. Switch on
the ST16 Ground Station and the aircraft and wait till the RC and WiFi
connected.
STEP 2)
Make sure the tilt mode and pan mode all switched upwards,
then tap the 'GPS Calibration' button and choose the 'GIMBAL
CALIBRATION'.
STEP 3)
The Gimbal camera will calibrate itself automatically. Wait the
gimbal camera align in 3 axis and stay still, which means the gimbal
calibration completes.
NOTICE:
The whole calibration will take about 2-3 minutes. During the
calibration process, do not touch or move the aircraft.
ACCELEROMETER CALIBRATION
STEP 1) Place the TYPHOON H on a level and stable surface. Switch on
the ST16 Ground Station and the aircraft and wait till the RC and WiFi
connected.
STEP 2)
Make sure the FLIGHT MODE switch is in the middle position.
Tap the GPS Calibration button, and choose 'ACCELEROMETER'.
STPE 3)
Keep the aircraft stable during the calibration process. During
calibration, the main led will blink red, green and blue slowly at first
and rapidly afterwards. If calibration succeed. The copter will restart
automatically. You will recognize the this when you hear the raising
tone.
NOTICE:
You must do the accelerometer calibration in no-wind condition.
IMPORTANT NOTE:
If calibration has failed, the Main LED Status
Indicator will be solid white and you must repeat the calibration
process. If the calibration continues to fail, either the site of calibra-
tion is unsuitable or the accelerometer is defective. Refer to your
Yuneec service center.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Typhoon H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Typhoon H in the language / languages: English as an attachment in your email.

The manual is 11,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Typhoon H

Yuneec Typhoon H Quick start guide - English - 2 pages

Yuneec Typhoon H Quick start guide - French - 2 pages

Yuneec Typhoon H User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info