669794

Yuneec Tornado ProAction CGO4 Manual

10
Zoom out
Zoom in
Previous page
1/29
Next page
8
BINDING H920 MULTICOPTER TO THE ST12 (TEAM MODE)
STEP 1: Power on the ST12 and tap “RC” on the main interface
STEP 2: Tap Model Select and if required press “OK” to bypass any pop up warning/alerts.
STEP 3: Tap to create a new model and if required press “OK” to bypass any pop up
warnings/alerts.
STEP 4: Tap Flight Settings and if required press “OK” to bypass any pop up warnings/alerts.
STEP 5: Lift the H920 back end upward approximately 45° , then back down to “level” twice
till the main LED indicator blinks yellow.
STEP 6: Tap the Refresh icon. Select the code of the H920 listed in the column under ”Model”
and tap Bind ,then tap “OK” after the connection has been established
STEP 7: When tapping, you will hear two long beeps from the aircraft. That means the ST12
is bound to the H920 successfully.
SPECIFYING THE APERTURE/ SHUTTER SPEED
NOTICE: The effect of the set aperture value and shutter speed
will not be visible on the recording screen.
NOTE：If the photographer wants to highlight the background,
set a relatively high aperture value; if the photographer wants a
soft background, set a relatively low level.
F3.5
F4.0
1/10s
1/13s
Aperture
Shuer Speed
Union
1/8s
---
---
Maximum Aperture F3.5(Wide)~F5.6(Tele)
Minimum Aperture F22
NOTE: If the photographer wants to capture fast-moving subjects, set a relatively high shutter
speed; if the photographer wants to track-shooting, set a relatively low shutter speed.
When CGO4 gimbal camera is in Aperture-Priority AE Mode, the camera automatically
optimizes the shutter speed for the brightness of the subject.
When CG04 gimbal camera is in shutter-priority AE Mode, the camera automatically optimizes
the aperture value for the brightness of the subject.
When CGO4 gimbal camera is in Manual Exposure Mode: the photographer can determine
the correct settings first, tap Mode button on the lower portion of the screen and a virtual
mode dial will pop up on the screen and then set the mode dial to [M].Slide the aperture value
picker and shutter speed picker to set the appropriate aperture value and shutter speed.
MENU SETTING INTRODUCTION
VIDEO SYSTEM
This allows you to set different system frequency. In different system frequencies, the video
qualities are different.
NTSC 4K/100M/30P; FHD/28M/60P; FHD/20M/30P; HD/10M/30P; VGA/4M/30P
PAL
4K/100M/25P; FHD/28M/50P; FHD/20M/25P; HD/10M/25P; VGA/4M/25P
CINEMA
C4K/100M/24P; 4K/100M/24P; FHD/ALL-intra/200M/24P; FHD/50M/24P
Mechanical Shutter Speed [Still image] Bulb(Max. 60minutes),1/8000-60 [Motion picture]: 59.94Hz:
1/16,ooo-1/30; 50.00Hz: 1/16,ooo-1/25; 23.98Hz: 1/16,ooo-1/24
Shutter Life Approx.200,000 images
Burst speed MECHANICAL SHUTTER: H: 12 frames/sec(AFS), 7 frames/sec(AFC)
M: 7 frames/sec(Live View) L: 2 frames/sec(Live View)
Electronic shutter: SH: 4O frames/sec
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado ProAction CGO4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado ProAction CGO4 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info