633010
33
Zoom out
Zoom in
Previous page
1/39
Next page
WARNINGS
During the charging process, a specific quantity of electrical energy is charged into
the battery.
The maximum permissible charge current varies depending on the type and performance
of the battery. The relevant information is supplied from the battery manufacturer.
Only batteries that are stated to be capable of quick-charge are allowed to be
charged at rates higher than the standard charging current.
Always refer to the user manual of the battery about the charging methods,
recommended charging current and charging time. Especially, the lithium battery
should be charged according to the charging instruction provided by the manufacturer
strictly. Special attention should be paid to the connection of lithium battery.
Do not attempt to disassemble the battery pack.
Do not use the battery when the battery is humid.
Please pay attention that lithium battery packs can be wired both in parallel and in series.
In the parallel connection: With the total voltage staying the same, the battery’s
capacity is calculated by multiplying single battery capacity by the number of cells.
The voltage imbalance may cause fire or explosion. The lithium battery is
recommended to charge in series.
INSTALLING THE PROACTION™ BATTERY
WARNING: Lithium batteries are significantly more volatile than alkaline, NiCd or
NiMH batteries. All instructions and warnings must be followed exactly to prevent
property damage and/or serious injury as the mishandling of Lithium batteries can
result in fire.
STEP 1) Slide the battery cover / door from the ProAction™ with slight force.
STEP 2) Install the battery in the battery compartment with the side of balancing head
facing upwards. And then connect the Power Connector to the gimbal.
STEP 3) Once you've installed the battery, put the power line inside the compartment.
Slide the battery cover / door downward with slight force and ensure you hear and feel
a noticeable 'click' indicating the battery cover / door has been closed securely.
ATTACHING THE GB603/CGO4 TO THE PROACTION™
ATTACHING THE GB603/CGO4 TO THE PROACTION™
STEP 1) Withdraw the Gimbal Cord from the left side
first, and then securely attach the GB603/CGO4 to
the ProAction™ with Gimbal Fastening Screws, while
ensuring the "Front" label on the Yaw Motor / Top
Motor is facing toward the FRONT of the ProAction™.
STEP 2) Insert the Gimbal Cord into the center
carrying handle port with the side of pins facing
upward.
STEP 3) Install the Fastening Accessory Socket to the
Camera (Take Panasonic camera GH4 as examples).
STEP 4) Flip the camera’s LCD screen for better
view- taking, fold out and then fold in.
31
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920

Yuneec Tornado H920 Quick start guide - English - 1 pages

Yuneec Tornado H920 User Manual - English - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info