633010

Yuneec Tornado H920 Manual

28
Zoom out
Zoom in
Previous page
1/39
Next page
STEP 4) If it is the first time to bind your
GB603 gimbal to the ST24, you need to
insert the password: 87654321. Press
OK on the pop-up window to continue.
STEP 5) Wait till the WiFi signal icon
appears, Tap Camera Select and select
your camera (Panasonic GH4, SONY 7,
CGO4 or V18), and then tap Select.
BINDING THE GB603 GIMBAL GIMBAL CAMERA TO THE ST24
IMPORTANT NOTE: Make sure there is a receiver in your GB603. Otherwise you need
to buy one from YUNEEC.
STEP 1) Power on the ST24, tap to go to the main interface. Tap the FPV icon, and
enter Model Select.
STEP 2) Choose the model GB603 Gimbal
STEP 3) Select System settings and switch on the TORNADO. Wait until the gimbal,
LK58 and GB603 are all ready. The receiver will blink orange quickly, which means the
process of binding is entered automatically. Tap refresh, the receiver code will be shown in
the Model column and the WIFI code will be
shown in the Camera column. Choose them
and tap bind.
26
BINDING CGO4 GIMBAL CAMERA TO THE ST24 (TEAM MODE)
STEP 1: Power on the ST24, tap [ ] to go to the main interface. Choose FPV and tap Model
select, select CGO4 model.
STEP 2: Switch on the TORNADO H920. Wait until the gimbal LED blinks green. That means
the Wi-Fi has started up.
STEP 3: Tap System Settings icon to enter the Bind interface.
STEP 4: Tap the Refresh icon, and the code of the Aircraft Model (it indicates the code of the
CGO4 receiver) and Camera will both be shown on the screen. Select the right codes and tap
the Bind icon. Tap OK when a pop-up window comes out.
NOTICE: If it is the first time to bind your CGO4 gimbal camera to the ST24, you need to
insert the password: 1234567890. Press OK on the pop-up window to continue.
STEP 5: Wait till the WiFi signal icon appears, Tap Camera Select and select CGO4, and
then tap Select.
STEP 6: Tap “OK” to confirm the setting and tap [ ] to go back to the flight control interface,
then imagies will be shown on the screen.
NOTICE: If the model chosen has never been bound before, 'NOT CONNECTED' will display
in the MODEL column, and the remote controller can bind any YUNEEC SR12/24 receiver. If
a series of receiver codes display on the screen, it means the model was bound before and
can't be bound to any other receiver. If you want to bind this model to other receiver,you can
press and hold the model icon in the MODEL SELECT interface till a pop-up window comes
out, tap 'Copy', and then select the model newly created.
NOTICE: When the gimbal is powered on, the receiver LED of the gimbal will blink orange
quickly if the gimbal is not bound to the transmitter, and the gimbal will enter into binding
process.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920

Yuneec Tornado H920 Quick start guide - English - 1 pages

Yuneec Tornado H920 User Manual - English - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info