669702
29
Zoom out
Zoom in
Previous page
1/40
Next page
Connecting drone...H:N/A V.S:N/AH.S:N/A D:N/A
The geo-fence is a user-determined, virtual barrier that will keep the aircraft flying
within a selected area. If inertia causes the H920 to fly beyond the geo-fence, it will
automatically return to a point within the fence area. The Geo-fence may be
enabled:
Select the fence icon [ ], and the task setting column will appear.
There are square, circle and triangle fences by default. Select a shape, tap the
screen, and a geo-fence of corresponding shape will display on the map.
Tap the screen at the center of the desired geo-fence. Press and hold the central
blue point indicator, and the entire fence may be moved. Slide the right sliding
block, and the proportion of the fence may be changed.
Select the [ ] icon and a custom-shape geo-fence may be set. Touch all desired
on the map, and the system will automatically link them to form the geo-fence.
NOTICE
: Currently, 20 points are limited to a maximum of 20 points. All points
should be set in order.
NOTICE: When using a default geo-fence, press and hold any vertex to adjust its
shape.
After setting/creating the geo-fence, switch to Angle mode. Press start, and then
slide the sliding block. The geo-fence function is now activated.
NOTICE: If the H920 PLUS launches/takes off outside of the geo-fence after the
geo-fence function is activated, once flown inside the geo-fence, it won't fly beyond
the pre-set fence line.
NOTICE: Ensure that geo-fence lines do not cross; otherwise the fence point will not
be successfully recorded.
Select the icon [ ] to delete the geo-fence.
Select the icon [ ] to set the altitude of geo-fence.
NOTICE:The geo-fence function may only be activated by tapping the screen and
sliding the slider. There is no pause for geo-fence function.
28
GEO-FENCE FUNCTION
NOTICE: When setting the altitude of the geo-fence, it is strongly recommended to
set the altitude higher than the H920 PLUS’s current altitude. The altitude of the
geo-fence should be more than 2m/6.6’ for safe operation of the H920 PLUS.
NOTICE: The geo-fence task will not automatically disable when the battery voltage
is low. By selecting the [ ] icon and slide to confirm will disable geo-fence
function.
NOTICE: If the ST16 is in Smart Mode after the geo-fence is activated, the H920
PLUS can fly beyond the geo-fence lines. When flying within the geo-fence in Home
mode, the H920 PLUS will be allowed to fly back to home point when the home point
is out of the geo-fence. The H920 PLUS is still within the geo-fence function. This
means that if the pilot switches the ST16 from Home Mode to Angle mode while the
H920 PLUS is inside the geo-fence, the aircraft will not fly beyond the geo-fence
line.
NOTICE:
Exit the geo-fence function by tapping the exit icon [ ] and sliding the
sliding block.
28
GEO-FENCE-FUNKTION
Der Geo-Fence ist eine vom Anwender festgelegte virtuelle Absperrung, die dafür sorgt, dass das Flug-
gerät einen ausgewählten Bereich nicht verlässt. Wenn der H920 aufgrund der Trägheitswirkung über
diese Absperrung hinausiegt, kehrt er automatisch zu einem Punkt innerhalb des umgrenzten Bereichs
zurück. Der Geo-Fence wird auf folgende Weise aktiviert:
Wählen Sie das Zaun-Symbol [ ], und die Spalte zum Festlegen von Aufgaben wird angezeigt.
Standardmäßig gibt es rechteckige, runde und dreieckige Einzäunungen. Wählen Sie eine Form,
tippen Sie auf den Bildschirm, und auf der Karte wird ein Geo-Fence mit der entsprechenden Form
angezeigt.
Tippen Sie in der Mitte des gewünschten Geo-Fence auf den Bildschirm. Drücken Sie längere Zeit
auf die blaue Punktanzeige, dann kann die gesamte Einzäunung verschoben werden. Sie können die
Proportionen der Einzäunung ändern, indem Sie den rechten Schieberegler verstellen.
Wenn Sie das Symbol [
] auswählen, können Sie einen Geo-Fence mit einer benutzerspezischen
Form festlegen. Tippen Sie auf alle gewünschten Punkte in der Karte, und das System verbindet sie
automatisch zu einem Geo-Fence.
HINWEIS: Derzeit können maximal 20 Punkte ausgewählt werden. Alle Punkte sollten der Reihe
nach festgelegt werden.
HINWEIS: Wenn Sie einen Standard-Geo-Fence verwenden, können Sie dessen Form anpassen,
indem Sie eine von dessen Ecken gedrückt halten.
Wechseln Sie in den Angle-Modus, nachdem Sie einen Geo-Fence festgelegt/erstellt haben. Drücken
Sie auf „Start“, und wischen Sie dann über das Wischfeld. Die Geo-Fence-Funktion ist jetzt aktiviert.
HINWEIS: Wenn der H920 PLUS außerhalb des Geo-Fence startet/abhebt, nachdem die Geo-Fen-
ce-Funktion aktiviert wurde, überiegt er die festgelegte Grenzlinie nicht mehr, nachdem er in den
umgrenzten Bereich hineingeogen ist.
HINWEIS: Achten Sie darauf, dass sich die Geo-Fence-Linien nicht kreuzen, denn sonst wird der
Punkt der Einzäunung nicht korrekt gespeichert.
Wählen Sie das Symbol [ ], um den Geo-Fence zu löschen.
Wählen Sie das Symbol [ ], um die Höhe des Geo-Fence festzulegen.
HINWEIS: Es wird dringend empfohlen, die Höhe des Geo-Fence höher als die aktuelle Flughöhe des
H920 PLUS einzustellen. Für einen sicheren Betrieb des H920 PLUS sollte die Höhe des Geo-Fence
mehr als 2 m betragen.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Plus in the language / languages: German as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920 Plus

Yuneec Tornado H920 Plus Quick start guide - English - 2 pages

Yuneec Tornado H920 Plus User Manual - English - 40 pages

Yuneec Tornado H920 Plus Quick start guide - German - 2 pages

Yuneec Tornado H920 Plus User Manual - French - 40 pages

Yuneec Tornado H920 Plus Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info