669702
26
Zoom out
Zoom in
Previous page
1/40
Next page
Connecting drone... H:N/A V.S:N/A H.S:N/A D:N/A
12 34 5
Focus POI
Way Point XX
Tilt
Focus POI
Hover Pan360
°„
Take photo Recond
NO YES
Manual
Custom
Custom
Custom
Action
Add Action
0°„
£´
£≠
Custom0°„
£´
£≠
1. When a POI/Point of Interest is set, all waypoints will point to the POI in pan
direction. The custom value will be the angle that the waypoint point to the POI in
pan direction. All single waypoints in pan mode will point to the POI automatically.
2. When no POI is set, all single waypoint in pan mode will be custom value by
default.
3. Custom value in pan direction: The value shows the angle that gimbal points to
the north in pan direction. When the value shows 0°, it means the gimbal pan
direction points to the north. The angle ranges from to 359°. When the angle is
larger, the gimbal pan direction will rotate more in clockwise direction. The custom
value will remain the last setting angle.
2Tilt
Point to the POI (only when the Custom Waypoint gimbal pan mode is selected in
Global Settings): The gimbal will tilt and automatically point the camera lens to the
POI.
Manual: The operation identical to the gimbal tilt control in angle mode. The left
slider on the ST16 controls gimbal tilt angle. The control range operates from to
-90°.
Custom:
At each waypoint, the tilt angle ranges from -90° to 0°. The custom angle
will record the last angle setting.
NOTICE: When single waypoint focuses POI in pan and tilt modes, the camera will
point to the POI automatically. The pilot can also switch to custom mode to trim the
angle to adjust the frame composition.
NOTICE: If a waypoint global setting or POI are not set, the pan and tilt modes of
waypoints both show custom values by default. The default custom value of single
waypoint in pan and tilt modes is 0°.
4. Add action
Multiple actions can be added to any waypoint, including Hover, Pan 360°, or
Record/ Take Photo. Each single point may a maximum of five (5) points.
25
1
2
3
4
5
25 26
1. Wenn ein POI (Point of Interest) festgelegt ist, ist die Schwenkrichtung bei allen Wegpunkten auf
den POI ausgerichtet. Der benutzerspezische Wert ist der Winkel, in dem die Schwenkrichtung
beim Wegpunkt auf den POI ausgerichtet ist. Alle einzelnen Wegpunkte im Schwenkmodus sind
automatisch auf den POI ausgerichtet.
2. Wenn kein POI festgelegt ist, haben alle Wegpunkte standardmäßig den Wert benutzerspezisch.
3. Benutzerspezischer Wert in Schwenkrichtung: Der Wert zeigt den Winkel an, in dem die Schwen-
krichtung der Gimbal von Norden abweicht. Wenn als Wert „0°“ angezeigt wird, bedeutet dies, dass
die Schwenkrichtung Norden ist. Der Winkel reicht von 0° bis 359°. Bei einem größeren Winkel
schwenkt die Gimbal im Uhrzeigersinn entsprechend weiter. Als Benutzereinstellung wird die letzte
Winkeleinstellung beibehalten.
2) Neigen
Auf den POI ausrichten (nur wenn in „Global Settings“ der Gimbal-Schwenkmodus „Custom Way-
point“ ausgewählt ist): Die Gimbal neigt sich und richtet das Objektiv automatisch auf den POI.
Manual: Der Ablauf ist identisch mit der Neigungssteuerung der Gimbal im Angle-Modus. Der linke
Schieberegler auf der ST16 steuert den Neigungswinkel der Gimbal. Der Steuerbereich reicht von 0°
bis –90°.
Custom: Bei jedem Wegpunkt reicht der Steuerbereich von –90° bis 0°. Als benutzerspezischer
Wert wird die letzte Winkeleinstellung gespeichert.
HINWEIS: Wenn im Einzelwegpunkt-Modus der POI im Schwenk- und im Neigungsmodus fokussiert
wird, richtet sich die Kamera automatisch auf den POI aus. Der Pilot kann auch zum benutzerspezi-
schen Modus umschalten, um den Winkel zu ändern und den Bildaufbau anzupassen.
HINWEIS: Wenn keine globale Einstellung für einen Wegpunkt oder kein POI festgelegt wird, haben
der Schwenk- und der Neigungsmodus von Wegpunkten Standardwerte. Die standardmäßige Benut-
zereinstellung für den Schwenk- und den Neigungsmodus bei Einzelwegpunkt ist 0°.
4. Aktion hinzufügen
Zu jedem Wegpunkt können unterschiedliche Aktionen hinzugefügt werden, wie zum Beispiel
„Hover“ (Schweben), „Pan 360°“ (360°-Schwenk) oder „Record/Take Photo“ (Aufnahme/Foto). Jeder
Einzelpunkt kann maximal fünf (5) Punkte haben.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Plus in the language / languages: German as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920 Plus

Yuneec Tornado H920 Plus Quick start guide - English - 2 pages

Yuneec Tornado H920 Plus User Manual - English - 40 pages

Yuneec Tornado H920 Plus Quick start guide - German - 2 pages

Yuneec Tornado H920 Plus User Manual - French - 40 pages

Yuneec Tornado H920 Plus Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info