669702
33
Zoom out
Zoom in
Previous page
1/40
Next page
PREPARING TO FLY
WARNING: Always operate the H920 PLUS in open areas (approximately 10,000
square feet/930 square meters or more) that are free from people, vehicles, trees and
other obstructions. Never fly near or above crowds, airports or buildings. Obey local
regulations at all times.
Never attempt to operate H920 PLUS nearby tall buildings/obstructions that do not
offer a clear view of the sky (a minimum clearance of 33m/100’).
Be sure to place the H920 PLUS on a level and stable surface before powering ON the
ST16 Ground Station and the H920 PLUS Aircraft.
FLYING
POWERING ON/OFF
NOTICE:
ALWAYS turn on the ST16 and allow it to boot up prior to powering the H920
PLUS
(and ALWAYS turn off/power down the H920 PLUS prior to turning off the
ST16).
If
the main LED status indicator flashes yellow, the compass calibration procedure will
need
to be executed. If the main LED status indicator is flashing blue, double check
t
hat the ST16 is powered on and set to the
corr
ect model memory. If the main LED
status indicator is still flashing blue, r
e-bind
t
he aircraft to the ST16.
S
TARTING/STOPPING THE MOTORS
Step
back approximately 26 feet (8 meters) behind the H920 Plus.
Pr
ess and hold the START/STOP button for about 3 seconds to
start, and about 2 seconds to stop the motors.
NOTICE:
If the motors can't be started in such cases of
compass
error, insufficient GPS signal with GPS on, or in
home mode, start the motors in angle mode.
Step back approximately 26 ft (8 m) behind the H920 Plus
32
32
PREPARING TO FLY
WARNING: Always operate the H920 PLUS in open areas (approximately 10,000 square feet/930
square meters or more) that are free from people, vehicles, trees and other obstructions. Never y
near or above crowds, airports or buildings. Obey local regulations at all times.
Never attempt to operate H920 PLUS nearby tall buildings/obstructions that do not offer a clear
view of the sky (a minimum clearance of 33m/100’).
Be sure to place the H920 PLUS on a level and stable surface before powering ON the ST16 Ground
Station and the H920 PLUS Aircraft.
FLYING
POWERING ON/OFF
NOTICE: ALWAYS turn on the ST16 and allow it to boot up prior to powering the H920 PLUS (and
ALWAYS turn off/power down the H920 PLUS prior to turning off the ST16). If the main LED status
indicator ashes yellow, the compass calibration procedure will need to be executed. If the main LED
status indicator is ashing blue, double check that
the ST16 is powered on and set to the correct model
memory. If the main LED status indicator is still
ashing blue, re-bind the aircraft to the ST16.
STARTING/STOPPING THE MOTORS
Step back approximately 26 feet (8 meters) behind the H920 Plus. Press
and hold the START/STOP button for about 3 seconds to start, and about
2 seconds to stop the motors.
NOTICE: If the motors can‘t be started in such cases of compass error,
insufcient GPS signal with GPS on, or in home mode, start the motors in
angle mode.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Plus in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920 Plus

Yuneec Tornado H920 Plus Quick start guide - English - 2 pages

Yuneec Tornado H920 Plus Quick start guide - German - 2 pages

Yuneec Tornado H920 Plus User Manual - German - 40 pages

Yuneec Tornado H920 Plus User Manual - French - 40 pages

Yuneec Tornado H920 Plus Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info