669702
26
Zoom out
Zoom in
Previous page
1/40
Next page
Connecting drone... H:N/A V.S:N/A H.S:N/A D:N/A
12 34 5
Focus POI
Way Point XX
Tilt
Focus POI
Hover Pan360
°„
Take photo Recond
NO YES
Manual
Custom
Custom
Custom
Action
Add Action
0°„
£´
£≠
Custom0°„
£´
£≠
1. When a POI/Point of Interest is set, all waypoints will point to the POI in pan
direction. The custom value will be the angle that the waypoint point to the POI in
pan direction. All single waypoints in pan mode will point to the POI automatically.
2. When no POI is set, all single waypoint in pan mode will be custom value by
default.
3. Custom value in pan direction: The value shows the angle that gimbal points to
the north in pan direction. When the value shows 0°, it means the gimbal pan
direction points to the north. The angle ranges from to 359°. When the angle is
larger, the gimbal pan direction will rotate more in clockwise direction. The custom
value will remain the last setting angle.
2Tilt
Point to the POI (only when the Custom Waypoint gimbal pan mode is selected in
Global Settings): The gimbal will tilt and automatically point the camera lens to the
POI.
Manual: The operation identical to the gimbal tilt control in angle mode. The left
slider on the ST16 controls gimbal tilt angle. The control range operates from to
-90°.
Custom:
At each waypoint, the tilt angle ranges from -90° to 0°. The custom angle
will record the last angle setting.
NOTICE: When single waypoint focuses POI in pan and tilt modes, the camera will
point to the POI automatically. The pilot can also switch to custom mode to trim the
angle to adjust the frame composition.
NOTICE: If a waypoint global setting or POI are not set, the pan and tilt modes of
waypoints both show custom values by default. The default custom value of single
waypoint in pan and tilt modes is 0°.
4. Add action
Multiple actions can be added to any waypoint, including Hover, Pan 360°, or
Record/ Take Photo. Each single point may a maximum of five (5) points.
25
1
2
3
4
5
25 26
1. When a POI/Point of Interest is set, all waypoints will point to the POI in pan direction. The custom
value will be the angle that the waypoint point to the POI in pan direction. All single waypoints in pan
mode will point to the POI automatically.
2. When no POI is set, all single waypoint in pan mode will be custom value by default.
3. Custom value in pan direction: The value shows the angle that gimbal points to the north in pan
direction. When the value shows 0°, it means the gimbal pan direction points to the north. The angle
ranges from 0° to 359°. When the angle is larger, the gimbal pan direction will rotate more in clockwi-
se direction. The custom value will remain the last setting angle.
2) Tilt
Point to the POI (only when the Custom Waypoint gimbal pan mode is selected in Global Settings):
The gimbal will tilt and automatically point the camera lens to the POI.
Manual: The operation identical to the gimbal tilt control in angle mode. The left slider on the ST16
controls gimbal tilt angle. The control range operates from 0° to -90°.
Custom: At each waypoint, the tilt angle ranges from -90° to 0°. The custom angle will record the last
angle setting.
NOTICE: When single waypoint focuses POI in pan and tilt modes, the camera will point to the POI
automatically. The pilot can also switch to custom mode to trim the angle to adjust the frame compo-
sition.
NOTICE: If a waypoint global setting or POI are not set, the pan and tilt modes of waypoints both
show custom values by default. The default custom value of single waypoint in pan and tilt modes is 0°.
4. Add action
Multiple actions can be added to any waypoint, including Hover, Pan 360°, or Record/ Take Photo.
Each single point may a maximum of ve (5) points.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado H920 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Plus in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado H920 Plus

Yuneec Tornado H920 Plus Quick start guide - English - 2 pages

Yuneec Tornado H920 Plus Quick start guide - German - 2 pages

Yuneec Tornado H920 Plus User Manual - German - 40 pages

Yuneec Tornado H920 Plus User Manual - French - 40 pages

Yuneec Tornado H920 Plus Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info