Manual Yuneec Tornado H920 Industry (page 20 of 39) (English)

669800

Zoom out

Zoom in

1/39

TF-Card

STEP 1)

Replace the damping system by

removing the 8 screws on TORNADO H920 with

the damping system of the V18.

STEP 2) Install the V18 on the damping plate by

secure four screws as illustrated.

STEP 3) Insert the SD card in the proper

position.

STEP 4) Connect the polarity-protected plug of

the V18 to the connection socket (right next to

the main switch of the H920) of the H920.

STEP 5) Locate the 'Front' label on the yaw

motor/top motor and ensure the 'Front' is

facing toward the front of the aircraft.

STEP 6) Connect the V18 gimbal camera to the

damping plate on the H920 by turning the M4

fastening screws in a clockwise direction,

tightening them to the secure position. Do not

over-tighten.

NOTICE: Make sure the SD card is free of space.

IMPORTANT NOTE: The rubber dampers of

GB603, CGO4 and V18 are all different. Make sure to mount them correctly. The

damper plate of the GB603 is above the damper carbon plate,while the damper

plate of the V18 and CGO4 is below the damper carbon plate.

DAMPING PLATE

INSTALLING THE V18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado H920 Industry in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yuneec Tornado H920 Industry Manual

Product: