633004
8
Zoom out
Zoom in
Previous page
1/13
Next page
GIMBAL CONTROL ON MULTICOPTER
NOTE:
In single mode, the camera and copter operations are conducted all by one
person. While in team mode, operations are conducted separately: The photographer is
in charge of the camera operation and the pilot is in charge of the copter operation. In
the following we will set single mode as an example. If the user wants to operate in team
mode, please refer to the instruction manual.
BINDING CGO4 GIMBAL CAMERA TO ST24
STEP 1 Turn on ST24 and tap FPV (First
Person View) on the main screen.
STEP 2 Select system setting when entered
First Person View mode.
STEP 3 Select the corresponding camera
SSID under “Bind” page.
NOTICE: Refresh the list manually so that the
target camera model can be found on the
screen.
STEP 4 Tap “Bind” and enter the
password:1234567890.
STE
P 5 When the Bind process has been completed, tap “Camera Select” and select the
camera type “CGO4”.
STEP 6 ST24 is able to create its own Wi-Fi network that streams a real-time view from the
camera.
Welcome, Pilot
9:43:31 pm
Bind
Bind
RC
Refresh
Model
SR24S_22622
YUNEEC_819203
Camera
ST24
FPV
Aircraft
FPV+DA58
Reset
FPV+ADA58
Other Settings
Mode Select
Hardware Monitor
Camera Select
In the default system settings of ST24, K5
takes control of the Pitch direction while K1
takes control of the Yaw direction. If K5
moves upward, the camera lens will trim
itself up. If K5 moves downward, the
camera lens will trim itself down. If K1 is
rotated to the right, the camera lens will
trim itself to the right. If K1 is rotated to the
left, the camera lens will trim itself to the
left.
Welcome, Pilot
9:43:31 pm
Bind
Other Settings
Mode Select
Hardware Monitor
Camera Select
Choose a camera:
Name: C-GO4
Type: lumix
Select
C-GO1
Sony_A7
Canon_5D3
V18
Panasonic_GH3/GH4
C-GO2
C-GO3
C-GO3-Pro
C-GO4
GIMBAL CONTROL ON PROACTION™
There are two modes to control the gimbal through ProAction™: Follow Mode and Global
Mode.
Switch on the ProAction™ on a at and stable surface. Do not move, sway or shake the
ProAction™ during initialization. After initialization, the gimbal will boot up normally in
either Follow or Global Mode, depending on user settings on the left-hand switches of the
ProAction™. Once the gimbal is on, it begins an automatic self-check by rotating about
the yaw axis. At this time, the power indicator will be on as well. At the same time the
control status LED will blink green and blue alternately.
( SINGLE MODE )
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec Tornado CGO4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado CGO4 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado CGO4

Yuneec Tornado CGO4 User Manual - English - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info