Manual Yuneec Tornado CGO4 (page 7 of 29) (English)

633004

Zoom out

Zoom in

1/29

ATTACHING CGO4 GIMBAL CAMERA TO MULTICOPTER

NOTICE: Remove the fixed foam pad from the CG04 gimbal camera before proceeding.

STEP 1 Insert the gimbal connection cord to the inner side of gimbal damping plate

(relative to the direction of H920 power connection port).

STEP 2 Mount the gimbal thumb screws and lock washers (4 pcs) to the gimbal and rotate

the screws until they’re secured into the gimbal damping plate.

NOTICE: The front of the gimbal should be installed in the direction of the nose of H920.

NOTICE: Use the dedicated lock washers when rotating

the screws.

STEP 3 Connect the gimbal power cord to H920 power

connection port.

BINDING CGO4 GIMBAL CAMERA TO THE ST24 (SINGLE MODE)

NOTICE: The build number of ST24 should be b94 or above. The user can view the build

number in the ‘About Device’ column.

STEP 1: Power on the ST24, press [ ] button to go to the main interface. Choose FPV, and

enter Model Select.

STEP 2: The default Model type is Multi-copter. Tap the “H920 CGO4” icon and press OK to

enter the flight control interface.

NOTE: The pre-set model in the “Model Select” interface cannot be deleted.

NOTE: The pre-set model can only be bound to one multi-copter. If the user wants to bind to

the other copters, press and hold the “H920 CGO4” icon, select “copy” on the pop-up menu.

Wait for a few seconds and then tap the newly created

icon. Press OK to enter the flight control interface.

STEP 3: Switch on the TORNADO H920. Wait for a

moment until the H920 Main LED indicator blinks blue,

the CGO4 LED indicator blinks green and then start the

binding procedures.

STEP 4: Lean the H920 in the forward direction twice (45°),

until the Main LED indicator blinks yellow.

STEP 5: Tap’System Settings’ and then tap ‘Bind’ on the left side of the screen.

STEP 6: Tap the Refresh icon, and the codes of the H920 and CGO4 will be shown on screen.

CGO4

STEP 2 STEP 5

Choose the right codes and press Bind.

STEP 7: If it is the first time to bind your CGO4 to the ST24, you need to insert the password:

1234567890. Press OK on the pop-up window to continue.

STEP 8: Press Camera Select and choose CGO4. Press Select, then press OK.

NOTICE: We recommend users to power on the aircraft in the angle mode.

NOTICE: When returns back to the FPV interface, you will hear two long beeps. That means

the binding is complete. The Real-time images can now be seen on the screen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec Tornado CGO4 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec Tornado CGO4

Yuneec Tornado CGO4 Quick start guide - English - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yuneec Tornado CGO4 Manual

Product: