669705
25
Zoom out
Zoom in
Previous page
1/25
Next page
23
INSTALLATION GUIDE
BEARING SET (8 PCS)
EGOCR007
1 Unscrew the wheel bolt. 2 Dismount
the wheel from the truck's axle.
3 Replace the bearing in the wheel
with the spare part by applying equal
pressure on the outer rings of the
bearings.
4 Mount the wheel back
onto the truck axle.
5 Screw on the
wheel nut and tighten.
MOTOR COVER EGOCR003
1 Unscrew the five screws securing
the motor cover.
2 Remove the motor
cover and replace it with the replace-
ment part.
3 Screw on the motor
cover screws and tighten.
DRIVE BELT EGOCR004
1 Unscrew the drive wheel bolt.
2 Dismount the rear wheels from the
trucks axle.
3 Unscrew the drive belt
cover screws.
4 Replace the belt with
the replacement part.
5 Screw on and
tighten the drive belt cover screws.
6 Mount the drive wheel back onto the
truck's axle.
7 Screw on the drive wheel
nut and tighten.
WHEEL SET WITH PRE-
INSTALLED BEARINGS
EGOCR006
1 Unscrew the wheel bolt. 2 Dismount
the wheel from the truck's axle and
replace it with the replacement part.
3 Screw on and tighten the wheel bolts.
BUSHING SET EGOCR005
1 Unscrew the kingpin nut from the
kingpin.
2 Replace the bushing.
3 Remount the truck and bushing on
the baseplate axle.
4 Screw on and
tighten the king pin nut.
THIS MANUAL IS SUBJECT TO CHANGE
WITH FUTURE REVISIONS.
> PLEASE VISIT WWW.YUNEEC.COM
BATTERY PACK EGOCR014
1 Unscrew the screws connecting the
battery pack to the deck.
2 Tilt the
battery pack out of its slot with the
ECU.
3 Disconnect the wires connec-
ting the battery pack to the ECU and
reconnect the ECU's wires to the replace-
ment part.
4 Slide the replacement part
in its slot with the ECU.
5 Screw in the
deck screws connecting the battery
pack to the deck.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec E-Go at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec E-Go in the language / languages: English as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec E-Go

Yuneec E-Go Quick start guide - English, German, French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info