669703
19
Zoom out
Zoom in
Previous page
1/26
Next page
1
If during your ride the board stops and the controller's blue
light is flashing, followed by a red flashing light and accom-
panied by vibration, it means the board's battery is low and
needs to be recharged.
If during your ride the board stops and the controller's green
light is flashing, followed by a red flashing light and accom-
panied by vibration, it means the controller's battery is low
and needs to be recharged.
If during your ride the board stops and the controller's blue
light is flashing one to four times, followed by one yellow flash
and is accompanied by vibration, it means the board's ECU is
overheated. Let it cool down for ten minutes and retry. If after
this the board stops again, please contact the E-GO2 customer
service.
If during your ride the board stops and the controller's blue
light is flashing one to four times, followed by two yellow
flashes and is accompanied by vibration, it means the board's
battery is overheated. Let it cool down for 10 minutes and retry.
If after this the board stops again, please contact the E-GO2
customer service.
If during your ride the board stops and the controller's blue
light is flashing one to four times, followed by three yellow
flashes and is accompanied by vibration, it means the board
has been overloaded or is being used on inclines greater than
recommended. It is advised to avoid these circumstances.
3.1
3.2
3.3
3.4
3.5
MY BOARD STOPS
AUTOMATICALLY
17
If during your ride the board stops and the controller's blue light is flashing,
followed by a red flashing light and accompanied by vibration, it means the
board's battery is low and needs to be recharged.
If during your ride the board stops and the controller's green light is flashing,
followed by a red flashing light and accompanied by vibration, it means the
controller's battery is low and needs to be recharged.
If during your ride the board stops and the controller's blue light is flashing
one to four times, followed by one yellow flash and is accompanied by
vibration, it means the board's ECU has overheated. Let it cool down for ten
minutes and retry. If after this the board stops again, please contact the
E-GO2 customer service.
If during your ride the board stops and the controller's blue light is flashing
one to four times, followed by two yellow flashes and is accompanied by
vibration, it means the board's battery has overheated. Let it cool down for
10 minutes and retry. If after this the board stops again, please contact
the E-GO2 customer service.
If during your ride the board stops and the controller's blue light is flashing
one to four times, followed by three yellow flashes and is accompanied by
vibration, it means the board has been overloaded or is being used on in-
clines greater than recommended.
If during your ride the board stops and the controller's blue light is flashing
one to four times, followed by four yellow flashes and is accompanied by
vibration, this indicates a motor malfunction. Please check if the motor plugs
are tightly is well connected to the lead of the battery compartment. If after
this the board stops again, please contact the E-GO2 customer service.
3.1
3.2
3.3
3.4
3.5
MY BOARD STOPS
AUTOMATICALLY
3.6
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yuneec E-Go 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yuneec E-Go 2 in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yuneec E-Go 2

Yuneec E-Go 2 Quick start guide - English, German - 2 pages

Yuneec E-Go 2 User Manual - French - 26 pages

Yuneec E-Go 2 Quick start guide - French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info