663752
6
Zoom out
Zoom in
Previous page
1/32
Next page
56
Программное обеспечение
На поставляемой с прибором карте памяти имеется программное обеспечение, представленное
следующими файлами:
“Stringer_driver”драйвер для подключения прибора к компьютеру. Установите его перед тем как
подключить прибор к компьютеру.
“Stringer_converter” программа для работы в режиме записи видеосигнала на жесткий диск ПК.
“Settime.txt” - файл для установки даты и времени.
Прибор совместим с операционными системами Windows XP, Windows Vista и Windows 7.
Примечание: перед использованием прибора программное обеспечение рекомендуется сохранить
на персональном компьютере. В случае утери файлов Вы можете обратиться в техническую
поддержку: support@yukonopticsglobal.com
Подключение к компьютеру
Примечание: скорость передачи данных с карты памяти на ПК - до 10Мб/сек.
Запустите установочный файл “Stringer_driver.exe”, чтобы установить драйвер на Ваш ПК.
Подключите прибор кабелем USB к компьютеру, он определится как съемный диск (убедитесь, что
карта памяти установлена в приборе). Прибор можно не включать.
С помощью программы Total Commander или других файловых менеджеров с картой SD
видеорекордера можно работать как со съемным диском.
Remove the lens cap from the objective lens (1).
Activate the device by turning the button “ON” (2) - the left LED indicator (8) will light up green.
Locate an object within 20 to 30 meters.
Rotate the eyepiece (3) until you clearly see the frame of the display and a fine black grid on it.
To turn on the IR Illuminator (4) push the “IR” button (5). The green indicator changes its color to yellow.
To change IR brightness level (from 1 to 3), continuously press the “IR”. To switch off the IR Illuminator,
keep the “IR” button pressed for two seconds – the left LED indicator (8) will change its color for green.
Rotate the objective lens (1) until you see a sharp image of the object.
When changing the viewing distance, try to see a sharp and high quality image by rotating the
objective lens (1).
Do not rotate the eyepiece (3) - the device has already been individually adjusted.
Having finished operation, turn the unit off with the “ON” (2) button –left LED indicator goes out.
Please observe polarity shown on the inner side of the battery compartment cover. If the batteries are low,
the left LED indicator (8) will blink green (or yellow - if the IR Illuminator is turned on).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yukon Stringer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yukon Stringer in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info